| 66167L Franke Slewing Ring Bearings | Sealed Speed Rating n3:7500 rpm; Grease Speed Rating Open/Shielded n1:11000 rpm; D:55.0000 mm; B:10.00 mm; Accessories:One Seal; Basic Static Radial Load Rating Co:6800 N; Oil Speed Rating Open/Shielded n2:14000 rpm; Basic Dynamic Radial Load Rating C:9560 N; Fillet Radius ra:0.64 mm; d:35.000 mm; |
| 7 1606 02 Rollix Slewing Ring Bearings | d1:198.438 mm; d3 max.:260.477 mm; B4:34.925 mm; Hydraulic nut:HMVC 44E; Threads per inch:8; Mass adapter sleeve assembly:11 kg; B1:130.048 mm; d:220 mm; B:32.004 mm; Sleeve:S 3044x7.13/16; G:219.151 mm; |
| 29 0841 01 Rollix Slewing Ring Bearings | d2 max.:114 mm; dk:66 mm; Basic static load rating C0:245 kN; Basic dynamic load rating C:156 kN; G:M 45x3; h:185 mm; Mass rod end:3.3 kg; C1 max.:31 mm; Specific dynamic load factor K:100 N/mm²; l7 min.:58 mm; Material constant KM:330; l1 min.:104 mm; B:35 mm; d:50 mm; l2 max.:244 mm; r1 min.:0.6 mm; α:6 °; |
| 38 0841 01 Rollix Slewing Ring Bearings | H:39 mm; Limiting speed:2000 r/min; ra max.:1.5 mm; D:155 mm; Da max.:98 mm; d1:155 mm; Basic dynamic load rating C:265 kN; Reference speed:1000 r/min; Minimum axial load factor A:0.108; D1:93 mm; Mass bearing:3.63 kg; d:90 mm; da min.:152 mm; r1,2 min.:1.5 mm; Basic static load rating C0:1160 kN; Fatigue load limit Pu:114 kN; B:13.5 mm; |
| 24 0411 01 Rollix Slewing Ring Bearings | Oil Speed Rating n2:10000 rpm; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:7500 rpm; D:62.0000 mm; d:25.000 mm; Grease Speed Rating n1:7500 rpm; Basic Dynamic Radial Load Rating C:34100 N; B:25.40 mm; Accessories:No Shield, no Seal,; Basic Static Radial Load Rating Co:30500 N; |
| 29 0641 01 Rollix Slewing Ring Bearings | Da:170 mm; R2:26.988 mm; J min.:269.875 mm; P150°:30.7 kN; P60°:92.5 kN; Initial grease fill:181.44 g; R1:63.5 mm; H1:107.95 mm; PG:1/8 NPT; Cap bolt:2 x 3/4-10 UNC; PosiTrac Plus contact element:2 x B10724-44; Stabilizing ring:SR-19-16; RG:3/8 NPT; N1:19.05 mm; P180°:36.9 kN; S:4.763 mm; Max. speed for PosiTrac Plus seal:2150 r/min; Appropriate attachment bolt size G:0.625 in; ba:46.038 mm; |
| 73111L Franke Slewing Ring Bearings | Preload class A GA:90 N; d2:37.7 mm; d:30 mm; Calculation factor f2B:1.02; Calculation factor f1:0.99; Calculation factor fHC:1.02; Calculation factor (single, tandem) Y2:0.87; B:13 mm; ra max.:1 mm; Attainable speed for grease lubrication:34000 r/min; Calculation factor f2A:1; da min.:34.6 mm; Calculation factor f2C:1.05; Basic static load rating C0:7.65 kN; Calculation factor (back-to-back, face-to-face) Y1:0.92; |
| 6 0734 Rollix Slewing Ring Bearings | r, r1,2 min.:1 mm; Mass inner ring:0.53 kg; B:54 mm; F:85 mm; d:75 mm; |
| 6 1390 03 Rollix Slewing Ring Bearings | Grease Speed Rating Open/Shielded n1:3600 rpm; Accessories:Two Seals; d:120.000 mm; Oil Speed Rating Open/Shielded n2:4300 rpm; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:2300 rpm; D:165.0000 mm; B:22.00 mm; Basic Dynamic Radial Load Rating C:55300 N; Basic Static Radial Load Rating Co:57000 N; |
| 36 0541 01 Rollix Slewing Ring Bearings | d1 ≈:89.4 mm; Axial load factor Y:0.6; d:70 mm; D:125 mm; ra max.:1.5 mm; Mass bearing:1.35 kg; db min.:92 mm; da min.:79 mm; Limiting speed:6300 r/min; Basic dynamic load rating C:137 kN; Fatigue load limit Pu:18 kN; Basic static load rating C0:137 kN; D1 ≈:108.3 mm; Da max.:115.4 mm; Calculation factor kr:0.15; r3,4 min.:1.5 mm; Reference speed:6000 r/min; Limiting value e:0.2; B:24 mm; |
| 75034A Franke Slewing Ring Bearings | P150°:32 kN; PG:1/8 NPT; End plug (suffix Y):EPR 10; P120°:35.6 kN; ba:48.419 mm; Labyrinth ring:2 x LOR 182; Cap bolt:2 x 3/4-10 UNC; Da:180 mm; H2:44.45 mm; R2:30.163 mm; h:44.45 mm; L:387.35 mm; Mass pillow block:33.9 kg; P180°:38.3 kN; N1:25.4 mm; Cap bolt recommended tightening torque:515.2 N·m; P60°:94.3 kN; J min.:295.275 mm; RG:3/8 NPT; J max.:333.375 mm; |
| 28 1091 01 Rollix Slewing Ring Bearings | Basic Dynamic Radial Load Rating C:85200 N; Oil Speed Rating n2:6300 rpm; d:45.000 mm; Basic Static Radial Load Rating Co:55000 N; D:120.0000 mm; Grease Speed Rating n1:4800 rpm; B:29.00 mm; Fillet Radius ra:2.00 mm; Fillet Radius rb:1.00 mm; |
| 23 0641 01 Rollix Slewing Ring Bearings | Da min.:59 mm; T:28.75 mm; r1,2 min.:1.5 mm; ra max.:1.5 mm; B:27 mm; Calculation factor Y:1.9; Ca min.:4 mm; Da max.:65 mm; Db min.:66 mm; Dimension series:2FD; Fatigue load limit Pu:9.65 kN; D:72 mm; rb max.:1.5 mm; Reference speed:7500 r/min; a:17.569 mm; da max.:39 mm; Limiting speed:10000 r/min; Calculation factor e:0.31; C:23 mm; d1 ≈:48.7 mm; |
| 75061A Franke Slewing Ring Bearings | h:87.313 mm; A2:317.5 mm; P60°:669 kN; P90°:400 kN; PG:1/4 NPT; R1:163.512 mm; Housing:SSAFS 640; H2:101.6 mm; Bearing limiting speed:1500 r/min; H:495.3 mm; Eye bolt:2 x 1/2-13 UNC; Ca:147.803 mm; P120°:249 kN; Da:419.999 mm; Cap bolt recommended tightening torque:4284.4 N·m; Cap bolt:4 x 1 1/2-6 UNC; R2:50.8 mm; Labyrinth ring:2 x LOR 664; Mass pillow block:441 kg; L:869.95 mm; |
| 68504A Franke Slewing Ring Bearings | Sealed Speed Rating n3:16000 rpm; Oil Speed Rating Open/Shielded n2:29000 rpm; Basic Dynamic Radial Load Rating C:5070 N; Shielded or Sealed B1:7.9 mm; Basic Static Radial Load Rating Co:2400 N; Width Plain B:6.4 mm; d:12.700 mm; Fillet Radius ra:0.41 mm; D:28.6000 mm; Grease Speed Rating Open/Shielded n1:24000 rpm; Accessories:One Seal; |
| 27 0841 01 Rollix Slewing Ring Bearings | Cap bolt, SAE grade:5; P180°:60.9 kN; J min.:320.675 mm; Initial grease fill:232.47 g; Da:200 mm; RG:3/8 NPT; Cap bolt:2 x 3/4-10 UNC; R2:31.75 mm; h:45.244 mm; Stabilizing ring:SR-22-19; P90°:89 kN; J max.:368.3 mm; S:4.763 mm; Pa:17.3 kN; N1:22.225 mm; Ca:62.789 mm; Appropriate attachment bolt size G:0.75 in; Mass pillow block:33.1 kg; Taconite seal:TER 110; P60°:149 kN; |
| No. | Brand | d | A | N | K | t | l | U | M |
| 28 0741 01 | Rollix | 160 mm | - | - | - | - | - | - | - |
| 32 0841 01 | Rollix | 80 mm | - | - | - | - | - | - | - |
| 2 0245 | Rollix | 280 mm | - | - | 7.5 mm | - | - | - | - |
| 77280A | Franke | 75 mm | - | - | - | - | - | - | - |
| 1 118 | Rollix | 20 mm | - | - | - | - | - | - | - |
| 37 0841 01 | Rollix | 320.000 mm | - | - | - | - | - | - | - |
| 29 0841 01 | Rollix | 50 mm | - | - | - | - | - | - | - |
| 3 0525 01 | Rollix | 12 mm | - | - | - | - | - | - | - |
| 25 1091 01 | Rollix | - | - | - | - | - | - | - | - |
| 1 213 | Rollix | 900 mm | - | - | - | - | - | - | 13 mm |
| 68564A | Franke | - | 45 mm | 21.5 mm | - | - | - | - | - |
| 7 0946 05 | Rollix | 460 mm | - | - | 9 mm | - | - | - | - |
| 68532A | Franke | 760 mm | - | - | 12 mm | - | - | - | - |
| 6 0574 09 | Rollix | - | - | - | - | - | - | - | - |
| 74092A | Franke | 45 mm | - | - | - | - | - | - | - |
| 22 0941 01 | Rollix | 95 mm | - | - | - | - | - | - | - |
| 73047L | Franke | - | - | - | - | - | - | - | - |
| 121.50.6000.990.41.1502 | Standard 5 | - | - | - | 3 mm | - | - | - | - |
| 77282A | Franke | 100.000 mm | - | - | - | - | - | - | - |
| 68314B | Franke | 55 mm | - | - | - | - | - | - | - |
| 68739A | Franke | 45 mm | - | - | - | - | - | - | - |
| 39 0741 01 | Rollix | 100.000 mm | - | - | - | - | - | - | - |
| 27 0741 01 | Rollix | 90.000 mm | - | - | - | - | - | - | - |
| 35 0941 01 | Rollix | 20.000 mm | - | - | - | - | - | - | - |
| 121.50.5600.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
3 0525 01 Rollix Slewing Ring Bearings Video
Briggs and Stratton 252707-0525-01 Parts Diagrams
Briggs and Stratton 252707-0525-01 Exploded View parts lookup by model. Complete exploded views of all ... (3 5/8) (Aluminum Ring Gear). Options Add to Cart.
National Aerospace Standard NAS1922-0525-3 Stainless ...
SkyGeek welcomes international orders! Please note: such orders are funneled into our NY warehouse and may take an extra 7-10 days to process. The benefit to ...
Lancer 01-0525/01 Tee, Barb, 3/8", Stainless Steel | Parts ...
Find OEM Lancer 01-0525/01 Tee, Barb, 3/8", Stainless Steel replacement part at Parts Town with fast same day shipping on all in-stock orders until 9pm ET.Parts Town Part #: LAN01-0525/01Previous Part #: LAN01-0525; LAN1000525Manufacturer #: 01-0525/01$2.84 · In stock
0525-1000 - StopCock angled, cap nut 3/4''- spout with nozzle
The StopCock discharge cocks fits all containers with G 3/4" connection threads. ... StopCock angled, cap nut 3/4''- spout with nozzle, old No. 0525-1.
Disquiet Junto Project 0525: Magic Number (1 of 3)
Jan 20, 2022 — It works like this: Someone records something one week, then someone else adds to it the next, and a third person completes the trio the final ...
Disquiet Junto Project 0525: Magic Number (1 of 3)
Step 3: Record a short piece of music, roughly two to three minutes in length, as described in Step 2. When done, if possible, pan the audio so ...
Sully Shoulder Stabilizer | DJO Global
The Sully® Shoulder Stabilizer brace is designed to stabilize, assist or restrict movement of the shoulder post–injury and postoperatively.