| 29 1091 01 Rollix Slewing Ring Bearings | N4:4 mm; Housing material:Cast iron; s1:22.2 mm; Basic dynamic load rating C:19.5 kN; A1:25 mm; Recommended diameter for attachment bolts, mm G:12 mm; d:30.163 mm; J6:140 mm; Recommended tightening torque for grub screw:4 N·m; Mass bearing unit:1.05 kg; Thread grub screw G2:1/4-28 UNF; J max.:127 mm; B:38.1 mm; J min.:108 mm; H:82 mm; A:40 mm; Fatigue load limit Pu:0.475 kN; H2:17 mm; H1:42.9 mm; |
| 2 256 Rollix Slewing Ring Bearings | Cap bolt:1 1/2-6 UNC; Eye bolt:2 x 1/2-13 UNC; Mass pillow block:356 kg; A2:311.15 mm; P150°:236 kN; Housing:SAFS 544; P60°:691 kN; J1:133.35 mm; Cap bolt recommended tightening torque:4284.4 N·m; Labyrinth ring:2 x LOR 165; Cap bolt, SAE grade:8; Stabilizing ring:SR-44-38; End plug (suffix Y):EPR 23; R2:46.831 mm; P120°:260 kN; H1:241.3 mm; H:473.075 mm; H2:95.25 mm; PG:1/4 NPT; |
| 1 2202 Rollix Slewing Ring Bearings | N4:2 mm; Hexagonal key size for grub screw N:3 mm; Rα:45 °; Housing:FYTB 505 M/VZ033; A:30 mm; R1:20.5 mm; Da:63.5 mm; Limiting speed:1500 r/min; s1:26.9 mm; Basic static load rating C0:7.8 kN; H:124 mm; Housing material:Cast iron; J:99 mm; Db1:65 mm; T:45.9 mm; d:25 mm; Recommended diameter for attachment bolts, inch G:0.375 in; Fatigue load limit Pu:0.335 kN; J7:12 mm; B1:44.4 mm; |
| 34 0541 01 Rollix Slewing Ring Bearings | B:40 mm; Limiting speed:4000 r/min; Basic dynamic load rating C:43.6 kN; d2 ≈:62.9 mm; Calculation factor Y2:4.1; Permissible angular misalignment α:1.5 °; r1,2 min.:2 mm; Calculation factor e:0.24; Mass bearing:1.65 kg; d:50 mm; Calculation factor Y0:2.8; D:110 mm; ra max.:2 mm; Basic static load rating C0:14 kN; Fatigue load limit Pu:0.72 kN; Calculation factor Y1:2.6; D2 ≈:95.2 mm; |
| 8 0340 04 Rollix Slewing Ring Bearings | P150°:68.1 kN; L:466.725 mm; h:59.531 mm; Ca:73.787 mm; Cap bolt:2 x 1-8 UNC; P60°:189 kN; Housing:SAF 526; Pa:24.9 kN; J1:82.55 mm; RG:1/2 NPT; Mass pillow block:64.5 kg; R1:79.375 mm; H1:152.4 mm; Cap bolt recommended tightening torque:400 N·m; Max. speed for Taconite seal:700 r/min; Da:230 mm; R2:36.513 mm; J min.:371.475 mm; A2:269.875 mm; Cap bolt, SAE grade:5; |
| 8 0307 Rollix Slewing Ring Bearings | d:38.1 mm; RG:1/4-28 UNF; R1:3.5 mm; J max.:146 mm; A5:30.6 mm; L:174.5 mm; B:49.2 mm; Basic static load rating C0:19 kN; Rα:45 °; Thread grub screw G2:5/16-24 UNF; Recommended diameter for attachment bolts, mm G:12 mm; Fatigue load limit Pu:0.8 kN; Recommended diameter for attachment bolts, inch G:0.5 in; N:24.5 mm; J:135.5 mm; H:99 mm; A1:33 mm; A:48 mm; Mass bearing unit:2.05 kg; Housing material:Stainless steel; |
| 7 1385 03 Rollix Slewing Ring Bearings | Oil Speed Rating n2:3200 rpm; Grease Speed Rating n1:2200 rpm; d:95.000 mm; B:55.60 mm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:2200 rpm; D:170.0000 mm; Accessories:Shield & Seal & Snap; Basic Dynamic Radial Load Rating C:159000 N; Basic Static Radial Load Rating Co:146000 N; |
| 28 0841 01 Rollix Slewing Ring Bearings | b:60 mm; B:100 mm; h:25 mm; Associated eyebolt for handling:M 16; G:Tr 1120x8; Mass lock nut:199 kg; d2:1160 mm; d1:1205 mm; d3:1260 mm; B5:125 mm; |
| 22 0641 01 Rollix Slewing Ring Bearings | Basic dynamic load rating C:148 kN; J min.:173.037 mm; d2:101.6 mm; L:234.95 mm; Attachment bolt diameter G:15.875 mm; s:31.75 mm; A:68.263 mm; da:63.5 mm; S:0.794 mm; Limiting speed:1100 r/min; A1:88.9 mm; H:142.875 mm; Mass bearing unit:7.26 kg; H2:44.45 mm; B:85.725 mm; H1:69.85 mm; J max.:196.85 mm; |
| 29 0941 01 Rollix Slewing Ring Bearings | d:15.000 mm; D:35.0000 mm; B:11.00 mm; Grease Speed Rating n1:19000 rpm; Oil Speed Rating n2:24000 rpm; Sealed Speed Rating n3:13000 rpm; Basic Static Radial Load Rating Co:3250 N; Basic Dynamic Radial Load Rating C:7800 N; Grease Speed Rating Open/Shielded n1:19000 rpm; Fillet Radius ra:0.64 mm; Accessories:Two Shields; Oil Speed Rating Open/Shielded n2:24000 rpm; |
| 22 0541 01 Rollix Slewing Ring Bearings | B:26.5 mm; F:25 mm; d:20 mm; Mass inner ring:0.038 kg; r, r1,2 min.:0.3 mm; |
| 1 118 Rollix Slewing Ring Bearings | Calculation factor Y2:3.5; B1:26 mm; Da max.:46.4 mm; Basic static load rating C0:4 kN; r1,2 min.:1 mm; D1 ≈:44.6 mm; B:15 mm; ra max.:1 mm; Limiting speed:18000 r/min; d3:38 mm; d:20 mm; Calculation factor Y0:2.5; Calculation factor kr:0.04; db min.:28 mm; Calculation factor Y1:2.2; Reference speed:28000 r/min; B4:8 mm; D:52 mm; Ba min.:5 mm; da max.:33 mm; |
| 24 0941 01 Rollix Slewing Ring Bearings | D:90.0000 mm; Oil Speed Rating n2:9000 rpm; Basic Dynamic Radial Load Rating C:48800 N; d:40.000 mm; Basic Static Radial Load Rating Co:33500 N; Fillet Radius ra:1.50 mm; Fillet Radius rb:1.00 mm; B:23.00 mm; Grease Speed Rating n1:7500 rpm; |
| 121.50.5600.990.41.1502 Standard 5 Slewing Ring Bearings | Ca:55.804 mm; P90°:71.2 kN; Cap bolt, SAE grade:5; Max. speed for Taconite seal:725 r/min; Da:180 mm; Initial grease fill:181.44 g; Mass pillow block:28.6 kg; P150°:40 kN; J max.:333.375 mm; P60°:119 kN; H1:114.3 mm; A2:228.6 mm; ba:46.831 mm; da:106.362 mm; Housing:FSAF 024 KA; J1:60.325 mm; H:217.488 mm; RG:3/8 NPT; P180°:48.9 kN; R1:58.737 mm; |
| 6 0675 Rollix Slewing Ring Bearings | Basic static load rating C0:1140 kN; ra max.:2.5 mm; d:110 mm; K:7.5 mm; D:200 mm; Calculation factor e:0.43; Calculation factor Y2:2.3; da max.:127 mm; rc max.:1 mm; Ca min.:6 mm; Da max.:188 mm; r5 min.:1 mm; 2B:106 mm; b:11 mm; Mass bearing pair:14.5 kg; Fatigue load limit Pu:122 kN; r3,4 min.:2.5 mm; Da min.:170 mm; T:112 mm; Calculation factor Y0:1.6; |
| 7 0946 05 Rollix Slewing Ring Bearings | B:424 mm; Calculation factor kr:530; D:650 mm; r1,2 min.:12 mm; Fatigue load limit Pu:1530 kN; Basic static load rating C0:18300 kN; d:460 mm; b:16.7 mm; r3,4 min.:3 mm; C:424 mm; K:9 mm; Basic dynamic load rating C:8250 kN; α:20 °; Design variant/feature:BC4.10/W33WI; D1 ≈:594 mm; Mass bearing:454 kg; F:510 mm; |
| No. | Brand | d | A | N | K | t | l | U | M |
| 67511A | Franke | 55 mm | - | - | - | - | - | - | - |
| 32 0741 01 | Rollix | 160 mm | - | - | - | - | - | - | - |
| 38 0541 01 | Rollix | - | - | - | - | - | - | - | - |
| 6 0307 | Rollix | 105.000 mm | - | - | - | - | - | - | - |
| 121.45.6000.990.41.1502 | Standard 5 | 60.000 mm | - | - | - | - | - | - | - |
| 24 0411 01 | Rollix | 25.000 mm | - | - | - | - | - | - | - |
| 121.50.6000.990.41.1502 | Standard 5 | - | - | - | 3 mm | - | - | - | - |
| 191.50.6300.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 25 0741 01 | Rollix | 160 mm | - | - | - | - | - | - | - |
| 32 0841 01 | Rollix | 80 mm | - | - | - | - | - | - | - |
| 6 2810 09 | Rollix | 30.000 mm | - | - | - | - | - | - | - |
| 37 1091 01 | Rollix | 15.000 mm | - | - | - | - | - | - | - |
| 7 1997 04 | Rollix | - | 68.263 mm | - | - | - | - | - | - |
| 1 2560 01 | Rollix | 85 mm | - | - | - | - | - | - | - |
| 29 0641 01 | Rollix | - | - | - | - | - | - | - | - |
| 23 0541 01 | Rollix | 25 mm | - | - | - | - | - | - | 23 mm |
| 7 2810 09 | Rollix | 45 mm | - | - | - | - | - | - | - |
| 33 1091 01 | Rollix | 35 mm | - | - | - | - | - | - | - |
| 7 0380 01 | Rollix | - | - | - | - | - | - | - | - |
| 1 1895 | Rollix | 60 mm | - | - | - | - | - | - | - |
3 0600 02 Rollix Slewing Ring Bearings Video
Section 16-3-600 - Assault and battery. :: 2012 South Carolina ...
2012 South Carolina Code of Laws Title 16 - Crimes and Offenses Chapter 3 - OFFENSES AGAINST THE PERSON Section 16-3-600 - Assault and battery.
Assault First, Second, or Third Degree | Charleston SC
Assault & Battery, 2nd degree is codified in S.C. Code §16-3-600(D). A person commits the misdemeanor offense of assault and battery in the second degree if ...
DOD - UFC 3-600-02 - OPERATIONS AND MAINTENANCE
This UFC provides requirements for inspection, test, and maintenance (ITM) of engineered fire protection features in Department of Defense (DoD) facilities.
TYLENOL REGULAR STRENGTH- acetaminophen tablet, film ...
More Info For This Drug · NDC Code(s): 50580-600-01, 50580-600-02, 50580-600-03 · Packager: Johnson & Johnson Consumer Inc., McNeil Consumer Healthcare Division.
UFC 3-601-02 Fire Protection Systems Inspection, Testing ...
This UFC provides requirements for inspection, testing, and maintenance (ITM) of active and passive fire protection and life safety features in DoD ...
UFC 3-600-02 : OPERATIONS AND MAINTENANCE - IHS ...
PURPOSE AND SCOPE. This UFC provides requirements for inspection, test, and maintenance (ITM) of engineered fire protection features in Department of Defense ( ...
South Carolina Code of Laws Unannotated
If a person is convicted of an offense pursuant to Section 16-3-29, 16-3-600, or manslaughter, and the offense is committed with a deadly weapon of the ...