| 34 0841 01 Rollix Slewing Ring Bearings | Oil Speed Rating Open/Shielded n2:7500 rpm; Accessories:Synthetic Rubber Sea; Grease Speed Rating Open/Shielded n1:6300 rpm; Sealed Speed Rating n3:4300 rpm; Fillet Radius ra:1.50 mm; D:100.0000 mm; B:33.34 mm; Basic Static Radial Load Rating Co:29000 N; d:55.000 mm; Basic Dynamic Radial Load Rating C:39700 N; |
| 6 0980 09 Rollix Slewing Ring Bearings | Fatigue load limit Pu:4.4 kN; Da min.:50 mm; r3,4 min.:1 mm; T:17.25 mm; d1 ≈:42 mm; Basic dynamic load rating C:46.6 kN; db min.:35 mm; D:58 mm; d:28 mm; ra max.:1 mm; r1,2 min.:1 mm; Calculation factor Y:1.6; rb max.:1 mm; Db min.:54 mm; Ca min.:2 mm; Basic static load rating C0:41.5 kN; a:13.155 mm; Limiting speed:12000 r/min; Reference speed:10000 r/min; da max.:35 mm; |
| 34 0411 01 Rollix Slewing Ring Bearings | Pa:470 kN; Oil level, min.:47 mm; Ca:114 mm; Appropriate attachment bolt, rec. tightening torque:665 N·m; da:140 mm; Q180°:450 kN; Cap bolt, size:M 24x130; N1:26 mm; J6:506 mm; A2:257 mm; Oil seal:2 x TSN 532 U; P0°:1300 kN; End cover:ASNH 532 R; Da:290 mm; Oil level, max.:57 mm; J:470 mm; J1:90 mm; H1:170 mm; Mass housing:55 kg; |
| 68568A Franke Slewing Ring Bearings | Db max.:95.8 mm; Preload class A GA:110 N; Calculation factor f1:1; D2:91.1 mm; Fatigue load limit Pu:0.655 kN; Preload class C GC:650 N; Calculation factor f2B:1.03; da max.:76.5 mm; Da max.:94 mm; ra max.:1 mm; Calculation factor f2A:1; d:65 mm; Calculation factor f0:8.4; Static axial stiffness, preload class C:124 N/µm; Preload class B GB:330 N; d1:77.26 mm; Calculation factor fHC:1.01; da min.:71 mm; |
| 39 0841 01 Rollix Slewing Ring Bearings | Fatigue load limit Pu:45 kN; Calculation factor e:0.54; rb max.:2.5 mm; Db min.:141 mm; d1 ≈:113.3 mm; r3,4 min.:2.5 mm; Calculation factor Y0:0.6; Da max.:139.5 mm; da max.:85 mm; Basic static load rating C0:400 kN; Calculation factor Y:1.1; Da min.:115 mm; Basic dynamic load rating C:346 kN; Reference speed:3400 r/min; T:54 mm; r1,2 min.:3 mm; Mass bearing:4.56 kg; Ca min.:7 mm; a:43.52 mm; |
| 68460A Franke Slewing Ring Bearings | r1 min.:3 mm; Da min.:855.5 mm; dk:875 mm; Sealing solution:-; C:280 mm; Design (sliding contact surface combination):Steel/PTFE FRP; Lubricant:Maintenance free &nd; da min.:766 mm; Specific dynamic load factor K:80 N/mm²; da max.:808 mm; b:35 mm; r2 min.:6 mm; Mass plain bearing:728 kg; M:13 mm; D:1000 mm; Basic static load rating C0:22400 kN; rb max.:6 mm; Da max.:974 mm; Specific static load factor K0:120 N/mm²; |
| 7 24 Rollix Slewing Ring Bearings | Basic dynamic load rating C:311 kN; Attachment bolt diameter G:19.05 mm; Mass bearing unit:22.5 kg; Limiting speed:2100 r/min; J min.:304.8 mm; H:217.488 mm; A1:133.35 mm; J max.:333.375 mm; s:41.275 mm; A:114.3 mm; L:387.35 mm; B:116.681 mm; d2:152.4 mm; H2:61.913 mm; J1:57.15 mm; S:0.794 mm; H1:107.95 mm; da:100.013 mm; |
| 37 0741 01 Rollix Slewing Ring Bearings | B:18.00 mm; Accessories:One Seal; D:165.0000 mm; d:130.000 mm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:37700 N; Basic Static Radial Load Rating Co:43000 N; Sealed Speed Rating n3:2200 rpm; Oil Speed Rating Open/Shielded n2:4300 rpm; Grease Speed Rating Open/Shielded n1:3600 rpm; |
| 77305B Franke Slewing Ring Bearings | S:4.763 mm; RG:3/8 NPT; ba:35.719 mm; Labyrinth ring:2 x LOR 51; A1:88.9 mm; H:187.325 mm; A2:127 mm; L:330.2 mm; Max. speed for PosiTrac Plus seal:1950 r/min; Pa:9.25 kN; Housing:FSAFS 517; Ca:45.796 mm; Mass pillow block:24.5 kg; Cap bolt, SAE grade:8; P150°:28.5 kN; PosiTrac Plus contact element:2 x B10724-53; P90°:49.8 kN; P60°:83.2 kN; R1:53.975 mm; Initial grease fill:110.56 g; |
| 68729A Franke Slewing Ring Bearings | A:60.325 mm; J max.:161.925 mm; s:29.766 mm; H2:31.75 mm; L:200.025 mm; Attachment bolt diameter G:12.7 mm; J min.:155.575 mm; da:38.1 mm; S:0.794 mm; Mass bearing unit:3.63 kg; B:59.531 mm; H1:53.975 mm; Limiting speed:6000 r/min; Basic dynamic load rating C:96.5 kN; H:107.95 mm; |
| 25 0841 01 Rollix Slewing Ring Bearings | N1:22.225 mm; End plug (suffix Y):EPR 15; Ca:55.804 mm; Labyrinth ring (dc shaft position):LOR 106; H:217.488 mm; J max.:333.375 mm; Da:180 mm; ba:38.894 mm; H1:114.3 mm; db:114.3 mm; Housing:FSAF 220; L:387.35 mm; dc:96.838 mm; Labyrinth ring (db shaft position):LOR 118; PG:1/4 NPT; R1:58.737 mm; h:42.069 mm; Appropriate attachment bolt size G:0.75 in; R2:30.163 mm; da:100 mm; |
| 68504A Franke Slewing Ring Bearings | Sealed Speed Rating n3:16000 rpm; Oil Speed Rating Open/Shielded n2:29000 rpm; Basic Dynamic Radial Load Rating C:5070 N; Shielded or Sealed B1:7.9 mm; Basic Static Radial Load Rating Co:2400 N; Width Plain B:6.4 mm; d:12.700 mm; Fillet Radius ra:0.41 mm; D:28.6000 mm; Grease Speed Rating Open/Shielded n1:24000 rpm; Accessories:One Seal; |
| 7 1606 02 Rollix Slewing Ring Bearings | d1:198.438 mm; d3 max.:260.477 mm; B4:34.925 mm; Hydraulic nut:HMVC 44E; Threads per inch:8; Mass adapter sleeve assembly:11 kg; B1:130.048 mm; d:220 mm; B:32.004 mm; Sleeve:S 3044x7.13/16; G:219.151 mm; |
| 74074A Franke Slewing Ring Bearings | d2 max.:182 mm; l7 min.:98 mm; G:M 64x4; C1 max.:48 mm; Basic dynamic load rating C:600 kN; l2 max.:364 mm; Mass rod end:12 kg; Specific dynamic load factor K:150 N/mm²; d:80 mm; r1 min.:1 mm; l1 min.:140 mm; Material constant KM:330; h:270 mm; α:5 °; B:55 mm; dk:105 mm; Basic static load rating C0:585 kN; |
| 77202B Franke Slewing Ring Bearings | D:380.0000 mm; Fillet Radius ra:2.00 mm; d:280.000 mm; Basic Dynamic Radial Load Rating C:216000 N; Grease Speed Rating Open/Shielded n1:1500 rpm; Accessories:One Shield; B:46.00 mm; Oil Speed Rating Open/Shielded n2:1800 rpm; Sealed Speed Rating n3:950 rpm; Basic Static Radial Load Rating Co:285000 N; |
| 8 0270 04 Rollix Slewing Ring Bearings | P90°:36 kN; H:169.863 mm; H2:31.75 mm; Initial grease fill:175.77 g; Cap bolt:2 x 5/8-11 UNC; L:330.2 mm; R2:21.431 mm; Housing:FSAF 516; Cap bolt recommended tightening torque:149.1 N·m; R1:53.181 mm; P180°:23.1 kN; A2:126.603 mm; Pa:6.23 kN; J1:53.975 mm; P150°:19.6 kN; A1:88.9 mm; P120°:21.8 kN; P60°:60.5 kN; PG:1/8 NPT; Bearing limiting speed:6000 r/min; |
| No. | Brand | d | A | N | K | t | l | U | M |
| 39 0941 01 | Rollix | 19.05 mm | 30 mm | 12.3 mm | - | - | - | - | - |
| 2 1805 02 | Rollix | 140 mm | - | - | - | - | - | - | - |
| 68532A | Franke | 760 mm | - | - | 12 mm | - | - | - | - |
| 73112L | Franke | 80 mm | - | - | - | - | - | - | - |
| 2 2202 | Rollix | 30.000 mm | - | - | - | - | - | - | - |
| 36 0941 01 | Rollix | 457.2 mm | - | - | - | - | - | - | - |
| 34 1091 01 | Rollix | 1000 mm | - | - | - | - | - | - | 15 mm |
| 36 0541 01 | Rollix | 70 mm | - | - | - | - | - | - | - |
| 25 0941 01 | Rollix | 220.000 mm | - | - | - | - | - | - | - |
| 7 1830 04 | Rollix | 190.000 mm | - | - | - | - | - | - | - |
| 35 1091 01 | Rollix | 65 mm | - | - | - | - | - | - | - |
| 2 0245 | Rollix | 280 mm | - | - | 7.5 mm | - | - | - | - |
| 21 0841 01 | Rollix | 50 mm | - | - | - | - | - | - | - |
| 73100L | Franke | 85.000 mm | - | - | - | - | - | - | - |
| 8 0574 08 | Rollix | 240 mm | - | - | - | - | - | - | - |
| 34 0841 01 | Rollix | 55.000 mm | - | - | - | - | - | - | - |
| 68524A | Franke | 25 mm | - | - | - | - | - | - | - |
| 77260A | Franke | 34.925 mm | - | 13.1 mm | - | - | - | - | - |
| 34 0411 01 | Rollix | - | - | - | - | - | - | - | - |
| 36 1091 01 | Rollix | - | - | - | - | - | - | - | - |
| 27 0411 01 | Rollix | 60 mm | - | - | - | - | - | - | - |
| 28 0741 01 | Rollix | 160 mm | - | - | - | - | - | - | - |
| 121.50.5600.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
7 0673 Rollix Slewing Ring Bearings Video
DJO 11-0673-7 - McKesson Medical-Surgical
Knee Brace DonJoy® Economy Left or Right Knee Hook and Loop Strap Closure 29-1/2 to 32 Inch Thigh Circumference / 21 to 23 Inch Mid-Patella Circumference ...Features: Indications: mild MCL and/or LCL sp...Manufacturer #: 11-0673-7Length: Aluminum / Drytex® / Nylon / PlasticFastening Type: Hook and Loop Strap Closure
Margin Trimmer #105/106 hdl #7 orange, mesial, 1mm - Hu ...
Cod MT105/0673. Margin Trimmer used to produce proper bevel on enamel margins. Similar to a hatchet except the blade is curved and the cutting edge angled.
Microwave-to-optics conversion using a mechanical oscillator ...
by M Forsch · 2020 · Cited by 159 — Conversion between signals in the microwave and optical domains is of great interest both for classical telecommunication and for connecting ...
Auto 7 301-0673 A/C Drive Belt
The Auto 7 A/C drive belt is the perfect OE replacement if you need a new A/C drive belt. Auto 7 is a supplier of original equipment quality parts for ...
The 10 Best Places near Haugerudsentret 1-7, 0673 Oslo, Norway ...
Browsing all of Haugerudsentret 1-7, 0673 Oslo, Norway - Tim Wendelboe, Himkok, Illegal Burger, Døgnvill Burger Vulkan, Habsak, Lille Saigon 1, ...
Clinical analysis of Kimura's disease in 24 cases from China
by G Zhang · 2020 · Cited by 14 — Lesion diameter ranged from 0.6 cm to 7 cm with unilateral involvement ... BMC Surg 20, 1 (2020). https://doi.org/10.1186/s12893-019-0673-7.
1955 Bowman 13 Clyde Vollmer PSA 7 (0673) | eBay
Find many great new & used options and get the best deals for 1955 Bowman 13 Clyde Vollmer PSA 7 (0673) at the best online prices at eBay!