| 75035A Franke Slewing Ring Bearings | Cap bolt, SAE grade:5; Da:359.999 mm; Stabilizing ring:2 x A8897; Cap bolt recommended tightening torque:271.2 N·m; J1:127 mm; Cap bolt:4 x 7/8-9 UNC; Adapter sleeve assembly:SNP 3048x9; Max. speed for PosiTrac Plus seal:640 r/min; PosiTrac Plus contact element:2 x B10724-552; RG:1 NPT; PG:1/4 NPT; H2:85.725 mm; R1:122.237 mm; ba:89.694 mm; J max.:635 mm; P90°:218 kN; P150°:120 kN; Housing:SAF 048 KA; |
| 68739A Franke Slewing Ring Bearings | l1 min.:92 mm; B:32 mm; Material constant KM:330; Basic static load rating C0:200 kN; Basic dynamic load rating C:127 kN; Specific dynamic load factor K:100 N/mm²; l7 min.:50 mm; l2 max.:217 mm; d2 max.:104 mm; h:163 mm; d:45 mm; α:7 °; Mass rod end:2.45 kg; G:M 42x3; r1 min.:0.6 mm; dk:60 mm; C1 max.:28 mm; |
| 25 0411 01 Rollix Slewing Ring Bearings | d1:190 mm; D1 ≈:278 mm; Limiting speed:2200 r/min; K:7.5 mm; B1:102 mm; ra max.:2 mm; Basic dynamic load rating C:1058 kN; da min.:207 mm; B2 ≈:108 mm; Fatigue load limit Pu:137 kN; Reference speed:1800 r/min; Basic static load rating C0:1530 kN; Mass bearing + sleeve:26.3 kg; Calculation factor Y0:2.8; Da max.:299 mm; G1:19 mm; b:13.9 mm; G:Tr 210x4; Calculation factor e:0.24; Calculation factor Y1:2.8; |
| 1 105 Rollix Slewing Ring Bearings | D:90 mm; T:27 mm; da max.:64 mm; Ca min.:5 mm; ra max.:1.5 mm; Cb min.:6 mm; d1 ≈:73.1 mm; B:27 mm; Reference speed:5600 r/min; rb max.:1.5 mm; Calculation factor Y0:1.1; Dimension series:2CE; db min.:64 mm; Basic dynamic load rating C:111 kN; Db min.:86 mm; Fatigue load limit Pu:15.3 kN; r1,2 min.:1.5 mm; Basic static load rating C0:137 kN; r3,4 min.:1.5 mm; Mass bearing:0.66 kg; |
| 25 0941 01 Rollix Slewing Ring Bearings | Grease Speed Rating Open/Shielded n1:1800 rpm; Accessories:Snap-Ring; Basic Static Radial Load Rating Co:290000 N; Fillet Radius ra:2.50 mm; D:340.0000 mm; d:220.000 mm; Oil Speed Rating Open/Shielded n2:2200 rpm; B:56.00 mm; Sealed Speed Rating n3:1100 rpm; Basic Dynamic Radial Load Rating C:247000 N; |
| 7 1606 02 Rollix Slewing Ring Bearings | d1:198.438 mm; d3 max.:260.477 mm; B4:34.925 mm; Hydraulic nut:HMVC 44E; Threads per inch:8; Mass adapter sleeve assembly:11 kg; B1:130.048 mm; d:220 mm; B:32.004 mm; Sleeve:S 3044x7.13/16; G:219.151 mm; |
| 77282A Franke Slewing Ring Bearings | Oil Speed Rating n2:3600 rpm; B:47.00 mm; d:100.000 mm; Basic Static Radial Load Rating Co:140000 N; Basic Dynamic Radial Load Rating C:174000 N; Sealed Speed Rating n3:2100 rpm; D:215.0000 mm; Accessories:Snap-Ring; Fillet Radius ra:2.50 mm; Oil Speed Rating Open/Shielded n2:3600 rpm; Grease Speed Rating Open/Shielded n1:3000 rpm; Grease Speed Rating n1:3000 rpm; |
| 68314B Franke Slewing Ring Bearings | Mass bearing:0.18 kg; Basic static load rating C0:13.7 kN; Reference grease quantity Gref:2.49 cm³; Basic dynamic load rating C:18.2 kN; r3,4 min.:0.3 mm; db min.:59.6 mm; Calculation factor f1:0.98; Calculation factor e:0.68; rb max.:0.3 mm; d2:62.7 mm; d:55 mm; ra max.:1 mm; Calculation factor f:1.15; Preload class A GA:120 N; Fatigue load limit Pu:0.585 kN; Calculation factor f2C:1.08; Calculation factor fHC:1; |
| 21 1091 01 Rollix Slewing Ring Bearings | b1:5 mm; D1 ≈:96 mm; Fatigue load limit Pu:25 kN; D:110 mm; das:88 mm; Basic static load rating C0:216 kN; d:80 mm; Calculation factor kr:0.25; Da max.:105.3 mm; Mass bearing:0.88 kg; ra max.:1 mm; d1 ≈:92 mm; Reference speed:2600 r/min; da min.:84.8 mm; Limiting speed:3400 r/min; r1,2 min.:1 mm; K:3.5 mm; B:30 mm; Basic dynamic load rating C:121 kN; |
| 24 1091 01 Rollix Slewing Ring Bearings | Basic dynamic load rating C:73.8 kN; J:104.775 mm; Mass bearing unit:4.54 kg; Limiting speed:5100 r/min; S:0.794 mm; L:136.525 mm; d2:62.706 mm; da:38.1 mm; A6:19.05 mm; Attachment bolt diameter G:12.7 mm; s:25.4 mm; A:58.737 mm; A5:29.369 mm; a:3.969 mm; N1:14.287 mm; A1:73.819 mm; B:69.85 mm; |
| 77260A Franke Slewing Ring Bearings | A1:16.1 mm; J1:31.8 mm; Bearing:YAR 207-106-2RF/VE49; Housing material:Composite for food a; J:50.8 mm; s1:25.4 mm; L1:89 mm; d:34.925 mm; Basic static load rating C0:15.3 kN; Recommended tightening torque for grub screw:6.5 N·m; N:13.1 mm; B4:6 mm; L:95 mm; Recommended diameter for attachment bolts, inch G:0.5 in; T:47.1 mm; Recommended diameter for attachment bolts, mm G:12 mm; Thread grub screw G2:5/16-24 UNF; |
| 35 1091 01 Rollix Slewing Ring Bearings | Reference speed:4000 r/min; r1,2 min.:3 mm; C:28 mm; a:27.732 mm; Da max.:129 mm; rb max.:2.5 mm; Calculation factor Y0:0.9; Fatigue load limit Pu:27.5 kN; Da min.:122 mm; d:65 mm; Dimension series:2GB; Cb min.:8 mm; T:36 mm; Db min.:130 mm; Ca min.:5 mm; da max.:84 mm; Basic dynamic load rating C:240 kN; Limiting speed:4800 r/min; Calculation factor Y:1.7; d1 ≈:98.75 mm; |
| 39 0641 01 Rollix Slewing Ring Bearings | T:45.3 mm; Db:90 mm; d:35 mm; Da:88.9 mm; A3:3.2 mm; Basic dynamic load rating C:25.5 kN; N:14.8 mm; L:96 mm; H:156 mm; A1:17 mm; A5:22 mm; Fatigue load limit Pu:0.655 kN; Recommended diameter for attachment bolts, mm G:12 mm; A:35 mm; Recommended tightening torque for grub screw:7.4 N·m; Housing material:Composite; J:130 mm; Mass bearing unit:0.63 kg; Basic static load rating C0:15.3 kN; s1:24.3 mm; |
| 192.50.6300.990.41.1502 Standard 5 Slewing Ring Bearings | Cap bolt:4 x 3/4-10 UNC; Housing:SAF 324; Appropriate attachment bolt size G:1 in; P150°:80.1 kN; P60°:230 kN; L:539.75 mm; End plug (suffix Y):EPR 15; ba:67.469 mm; Max. speed for Taconite seal:575 r/min; Taconite seal (dc shaft position):TER 119; Ca:95.809 mm; Pa:62.3 kN; Mass pillow block:91.3 kg; R1:82.55 mm; Da:259.999 mm; RG:3/8 NPT; H:320.675 mm; Cap bolt recommended tightening torque:203.4 N·m; |
| 37 0541 01 Rollix Slewing Ring Bearings | Calculation factor f2C:1.12; Attainable speed for grease lubrication:14000 r/min; Mass bearing:0.28 kg; Calculation factor f:1.19; Db max.:98 mm; Number of balls z:24; Calculation factor (single, tandem) Y2:0.87; B:16 mm; Calculation factor (single, tandem) X2:0.41; Calculation factor f2A:1; Fatigue load limit Pu:1.37 kN; C3:2.8 mm; C2:3.5 mm; d1:79.2 mm; dn:81.7 mm; Calculation factor (back-to-back, face-to-face) Y1:0.92; |
| 2 2618 Rollix Slewing Ring Bearings | r3,4 min.:2.1 mm; d1 ≈:90.65 mm; Mass angle ring:0.3 kg; B2:18 mm; d:65 mm; B1:10 mm; |
| No. | Brand | d | A | N | K | t | l | U | M |
| 7 1140 13 | Rollix | - | - | - | - | - | - | - | - |
| 7 0380 01 | Rollix | - | - | - | - | - | - | - | - |
| 25 0641 01 | Rollix | 35.000 mm | - | - | - | - | - | - | - |
| 2 1415 | Rollix | - | 34.5 mm | 14 mm | - | - | - | - | - |
| 2 1225 | Rollix | - | - | - | - | - | - | - | - |
| 27 0841 01 | Rollix | - | - | - | - | - | - | - | - |
| 1 2040 03 | Rollix | 70 mm | - | - | - | - | - | - | - |
| 68470A | Franke | 50.000 mm | - | - | - | - | - | - | - |
| 2 2022 | Rollix | 40.000 mm | - | - | - | - | - | - | - |
| 31 0941 01 | Rollix | - | - | - | - | - | - | - | - |
| 8 0405 05 | Rollix | 35 mm | - | - | - | - | - | - | - |
| 66165L | Franke | - | - | - | - | - | - | - | - |
| 77305B | Franke | - | - | - | - | - | - | - | - |
| 36 0741 01 | Rollix | - | - | - | - | - | - | - | - |
| 23 0841 01 | Rollix | 65.000 mm | - | - | - | - | - | - | - |
| 1 2202 | Rollix | 25 mm | 30 mm | - | - | - | - | - | - |
| 1 0626 | Rollix | - | - | - | - | - | - | - | - |
| 38 0941 01 | Rollix | 65 mm | - | - | - | - | - | - | - |
| 37 0411 01 | Rollix | 55.000 mm | - | - | - | - | - | - | - |
| 1 0342 | Rollix | 100.000 mm | - | - | - | - | - | - | - |
| 25 0411 01 | Rollix | - | - | - | 7.5 mm | - | - | - | - |
| 6 1390 03 | Rollix | 120.000 mm | - | - | - | - | - | - | - |
| 39 0741 01 | Rollix | 100.000 mm | - | - | - | - | - | - | - |
| 38 1091 01 | Rollix | 30.000 mm | - | - | - | - | - | - | - |
| 6 1790 09 | Rollix | - | - | - | - | - | - | - | - |
2 082 Rollix Slewing Ring Bearings Video
The 2021 Florida Statutes - Online Sunshine
(II) A split sentence that is a term of at least 25 years' imprisonment and not exceeding life imprisonment, followed by probation or community control for the ...
Rev. Proc. 82-2, 1982-1 CB 367 - Internal Revenue Service
82-2, 1982-1 C.B. 367. SECTION 1. PURPOSE. The purpose of this revenue ... (2) the cy pres doctrine as to testamentary charitable trusts, which can exist.6 pages
Table 2 - MN Statutes - MN Revisor's Office
Section 15A.082 Actions during the 2021 Regular and 1st Special Session. Search. 15 Records Found for during the. All Legislative Sessions 1994 to present ...
Title 301 Chapter 2 Regulation 082 • Kentucky Administrative ...
Transporting exotic wildlife into and through the state to a destination outside Kentucky. (2). A copy of a valid transportation permit or permit authorization ...
Quest 082: Rumpel, the Village Vet - Ni No Kuni 2 - IGN
Mar 26, 2018 — Defeat this monster to receive 2 supreme sixth censers, 7480 guilders, and a ring of rancor. Then, speak with Rumpel to complete the quest.
082 Saniaccess 3 Macerator Effluent Pump (1/2 HP) - The ...
This item: 082 Saniaccess 3 Macerator Effluent Pump (1/2 HP). $946.05. Saniflo 2-Piece 1.28 GPF Single Flush Elongated Toilet in White. $499.00.
Art. 82 GDPR – Right to compensation and liability
2A processor shall be liable for the damage caused by processing only where it has not complied with obligations of this Regulation specifically directed to ...