| 77260A Franke Slewing Ring Bearings | A1:16.1 mm; J1:31.8 mm; Bearing:YAR 207-106-2RF/VE49; Housing material:Composite for food a; J:50.8 mm; s1:25.4 mm; L1:89 mm; d:34.925 mm; Basic static load rating C0:15.3 kN; Recommended tightening torque for grub screw:6.5 N·m; N:13.1 mm; B4:6 mm; L:95 mm; Recommended diameter for attachment bolts, inch G:0.5 in; T:47.1 mm; Recommended diameter for attachment bolts, mm G:12 mm; Thread grub screw G2:5/16-24 UNF; |
| 66165L Franke Slewing Ring Bearings | Cap bolt recommended tightening torque:298.3 N·m; P90°:107 kN; A1:120.65 mm; S:4.763 mm; R2:31.75 mm; P150°:59.6 kN; Ca:62.89 mm; R1:67.866 mm; Cap bolt, SAE grade:8; ba:50.006 mm; P60°:178 kN; h:45.244 mm; H:244.475 mm; P180°:72.5 kN; H2:52.388 mm; H1:125.425 mm; P120°:66.7 kN; L:419.1 mm; A2:165.1 mm; Eye bolt:2 x 3/8-16 UNC; |
| 1 2202 Rollix Slewing Ring Bearings | N4:2 mm; Hexagonal key size for grub screw N:3 mm; Rα:45 °; Housing:FYTB 505 M/VZ033; A:30 mm; R1:20.5 mm; Da:63.5 mm; Limiting speed:1500 r/min; s1:26.9 mm; Basic static load rating C0:7.8 kN; H:124 mm; Housing material:Cast iron; J:99 mm; Db1:65 mm; T:45.9 mm; d:25 mm; Recommended diameter for attachment bolts, inch G:0.375 in; Fatigue load limit Pu:0.335 kN; J7:12 mm; B1:44.4 mm; |
| 73100L Franke Slewing Ring Bearings | D:145.0000 mm; Grease Speed Rating Open/Shielded n1:3400 rpm; d:85.000 mm; Basic Static Radial Load Rating Co:68000 N; Oil Speed Rating Open/Shielded n2:4200 rpm; B:18.00 mm; Accessories:Without Accessories; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:58300 N; |
| 68468A Franke Slewing Ring Bearings | B:31 mm; Hexagonal key size for grub screw N:3.175 mm; RG:1/4-28 UNF; Basic static load rating C0:6.55 kN; R1:1.5 mm; H2:14 mm; Recommended diameter for attachment bolts, inch G:0.375 in; H:63.5 mm; Recommended diameter for attachment bolts, mm G:10 mm; N:21 mm; Housing material:Stainless steel; L:127 mm; s1:18.3 mm; Limiting speed:5000 r/min; J min.:87 mm; Basic dynamic load rating C:10.8 kN; H1:33.3 mm; |
| 6 1595 04 Rollix Slewing Ring Bearings | Oil Speed Rating Open/Shielded n2:4300 rpm; d:85.000 mm; B:73.03 mm; Accessories:Removable Metal Shie; Basic Static Radial Load Rating Co:96500 N; Grease Speed Rating Open/Shielded n1:3600 rpm; Basic Dynamic Radial Load Rating C:133000 N; D:180.0000 mm; Sealed Speed Rating n3:2400 rpm; Fillet Radius ra:2.50 mm; |
| 68568A Franke Slewing Ring Bearings | Db max.:95.8 mm; Preload class A GA:110 N; Calculation factor f1:1; D2:91.1 mm; Fatigue load limit Pu:0.655 kN; Preload class C GC:650 N; Calculation factor f2B:1.03; da max.:76.5 mm; Da max.:94 mm; ra max.:1 mm; Calculation factor f2A:1; d:65 mm; Calculation factor f0:8.4; Static axial stiffness, preload class C:124 N/µm; Preload class B GB:330 N; d1:77.26 mm; Calculation factor fHC:1.01; da min.:71 mm; |
| 39 0641 01 Rollix Slewing Ring Bearings | T:45.3 mm; Db:90 mm; d:35 mm; Da:88.9 mm; A3:3.2 mm; Basic dynamic load rating C:25.5 kN; N:14.8 mm; L:96 mm; H:156 mm; A1:17 mm; A5:22 mm; Fatigue load limit Pu:0.655 kN; Recommended diameter for attachment bolts, mm G:12 mm; A:35 mm; Recommended tightening torque for grub screw:7.4 N·m; Housing material:Composite; J:130 mm; Mass bearing unit:0.63 kg; Basic static load rating C0:15.3 kN; s1:24.3 mm; |
| 6 0307 Rollix Slewing Ring Bearings | Fillet Radius ra:2.00 mm; B:65.10 mm; D:190.0000 mm; Grease Speed Rating n1:1800 rpm; d:105.000 mm; Accessories:Two Shields; Sealed Speed Rating n3:1800 rpm; Oil Speed Rating n2:2800 rpm; Basic Static Radial Load Rating Co:180000 N; Basic Dynamic Radial Load Rating C:186000 N; |
| 7 1997 04 Rollix Slewing Ring Bearings | J min.:198.438 mm; da:69.85 mm; s:31.75 mm; H:165.894 mm; A:68.263 mm; H1:82.55 mm; A1:95.25 mm; J max.:223.838 mm; B:92.075 mm; Limiting speed:2800 r/min; d2:111.125 mm; L:265.113 mm; S:0.794 mm; Attachment bolt diameter G:19.05 mm; Basic dynamic load rating C:158 kN; Mass bearing unit:9.98 kg; H2:57.15 mm; |
| 68552A Franke Slewing Ring Bearings | Mass rod end:3.9 kg; r1 min.:0.6 mm; d:50 mm; G:M 52x3; C1 max.:31 mm; Basic dynamic load rating C:156 kN; B:35 mm; d2 max.:114 mm; Material constant KM:330; l7 min.:58 mm; l1 min.:110 mm; l2 max.:254 mm; Specific dynamic load factor K:100 N/mm²; h:195 mm; dk:66 mm; α:6 °; Basic static load rating C0:245 kN; |
| 26 0541 01 Rollix Slewing Ring Bearings | d:85.000 mm; Oil Speed Rating n2:5000 rpm; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:4300 rpm; Basic Static Radial Load Rating Co:93000 N; Fillet Radius ra:2.00 mm; D:150.0000 mm; B:28.00 mm; Basic Dynamic Radial Load Rating C:104000 N; |
| 31 1091 01 Rollix Slewing Ring Bearings | Basic Static Radial Load Rating Co:98000 N; B:44.00 mm; Grease Speed Rating n1:3600 rpm; Fillet Radius rb:0.60 mm; Oil Speed Rating n2:4600 rpm; D:125.0000 mm; Basic Dynamic Radial Load Rating C:79300 N; Fillet Radius ra:1.00 mm; d:80.000 mm; |
| 191.50.6735.990.41.1502 Standard 5 Slewing Ring Bearings | D:736.6 mm; Mass bearing:150 kg; Comparative axial load rating CFa:355 kN; Calculation factor Y1:1.9; Basic dynamic load rating C:4290 kN; Calculation factor Y0:1.8; Basic static load rating C0:11600 kN; Calculation factor e:0.35; T:225.425 mm; Thrust factor K:1.69; r1,2 min.:6.4 mm; d1 ≈:640 mm; Comparative radial load rating CF:1060 kN; r3,4 min.:1.5 mm; C:177.8 mm; d:558.8 mm; Calculation factor Y2:2.9; |
| 192.50.6735.990.41.1502 Standard 5 Slewing Ring Bearings | Mass inner ring:0.0092 kg; d:10 mm; r, r1,2 min.:0.3 mm; B:16 mm; F:14 mm; |
| 1 3031 Rollix Slewing Ring Bearings | Basic static load rating C0:0.112 kN; da min.:6.9 mm; D1 ≈:8.9 mm; Mass bearing:0.0006 kg; ra max.:0.15 mm; Fatigue load limit Pu:0.005 kN; r1,2 min.:0.15 mm; B:2.5 mm; Basic dynamic load rating C:0.286 kN; Calculation factor kr:0.015; D:10 mm; Calculation factor f0:7.9; d:6 mm; Limiting speed:75000 r/min; Da max.:9 mm; Reference speed:120000 r/min; d1 ≈:7.04 mm; |
| No. | Brand | d | A | N | K | t | l | U | M |
| 22 1091 01 | Rollix | 110 mm | - | - | - | - | - | - | - |
| 25 0541 01 | Rollix | - | 63.5 mm | - | - | - | - | - | - |
| 34 0411 01 | Rollix | - | - | - | - | - | - | - | - |
| 34 1091 01 | Rollix | 1000 mm | - | - | - | - | - | - | 15 mm |
| 36 0411 01 | Rollix | 85 mm | - | - | - | - | - | - | - |
| 36 0741 01 | Rollix | - | - | - | - | - | - | - | - |
| 3 0402 | Rollix | 320.000 mm | - | - | - | - | - | - | - |
| 23 0541 01 | Rollix | 25 mm | - | - | - | - | - | - | 23 mm |
| 73112L | Franke | 80 mm | - | - | - | - | - | - | - |
| 31 1091 01 | Rollix | 80.000 mm | - | - | - | - | - | - | - |
| 21 0411 01 | Rollix | - | - | - | - | - | - | - | - |
| 1 3031 | Rollix | 6 mm | - | - | - | - | - | - | - |
| 77280A | Franke | 75 mm | - | - | - | - | - | - | - |
| 2 105 | Rollix | - | 80.963 mm | - | - | - | - | - | - |
| 74112A | Franke | - | 88.9 mm | - | - | - | - | - | - |
| 21 0841 01 | Rollix | 50 mm | - | - | - | - | - | - | - |
| 68460A | Franke | - | - | - | - | - | - | - | 13 mm |
| 37 0541 01 | Rollix | 70 mm | - | - | - | - | - | - | - |
| 32 1091 01 | Rollix | 300.000 mm | - | - | - | - | - | - | - |
| 2 0308 01 | Rollix | 50.000 mm | - | - | - | - | - | - | - |
2 105 Rollix Slewing Ring Bearings Video
105 CMR 410.00: Minimum standards of fitness for human ...
105 CMR 410.00: Minimum standards of fitness for human habitation (State Sanitary Code, chapter II). Date: 01/29/2007. Organization: ...Official Version: Purchase the official versionRegulatory Authority: MGL c. 111, §§ 3 and 12...Date: 01/29/2007
§ 2-105. Definitions: Transferability; "Goods"; "Future" Goods ...
(1) "Goods" means all things (including specially manufactured goods) which are movable at the time of identification to the contract for sale other than ...
commercial unit, Neb. UCC § 2-105 | Casetext Search + Citator
Neb. U.C.C. § 2-105 · (1) "Goods" means all things (including specially manufactured goods) which are movable at the time of identification to the contract for ...
35 ILCS 105/2 - Illinois General Assembly
(35 ILCS 105/2) (from Ch. 120, par. 439.2) Sec. 2. Definitions. "Use" means the exercise by any person of any right or power over tangible personal property ...
§ 64.2-105. Incorporation by reference of certain powers of ...
2. At the discretion of the fiduciary, to receive additions to the estate from any source, in cash or in kind, and to hold, administer, and distribute such ...
2-2-105. Ethical requirements for public officers and public ...
2-2-105. Ethical requirements for public officers and public employees. (1) The requirements in this section are intended as rules of conduct, ...
Code of Laws - Title 56 - South Carolina Legislature
SECTION 56-2-105. Golf cart permit and the operation of a golf cart. (A) For the purposes of this section, "gated community" means any homeowners' community ...