| 68605A Franke Slewing Ring Bearings | Grease Speed Rating Open/Shielded n1:13000 rpm; Accessories:One Shield; Fillet Radius ra:1.00 mm; B:15.00 mm; Grease Speed Rating n1:13000 rpm; Oil Speed Rating Open/Shielded n2:16000 rpm; Sealed Speed Rating n3:9500 rpm; Basic Dynamic Radial Load Rating C:15900 N; Basic Static Radial Load Rating Co:7800 N; Oil Speed Rating n2:16000 rpm; D:52.0000 mm; d:20.000 mm; |
| 38 0641 01 Rollix Slewing Ring Bearings | ra max.:2.5 mm; Dimension series:2DC; Calculation factor Y:1.8; Calculation factor Y0:1; Ca min.:7 mm; Limiting speed:2800 r/min; Mass bearing:3.95 kg; Reference speed:2200 r/min; T:38 mm; Db min.:202 mm; Cb min.:8 mm; Basic dynamic load rating C:346 kN; d1 ≈:177.8 mm; C:30 mm; Da max.:198.5 mm; B:38 mm; Basic static load rating C0:530 kN; Calculation factor e:0.33; Da min.:194 mm; D:210 mm; |
| 77282A Franke Slewing Ring Bearings | Oil Speed Rating n2:3600 rpm; B:47.00 mm; d:100.000 mm; Basic Static Radial Load Rating Co:140000 N; Basic Dynamic Radial Load Rating C:174000 N; Sealed Speed Rating n3:2100 rpm; D:215.0000 mm; Accessories:Snap-Ring; Fillet Radius ra:2.50 mm; Oil Speed Rating Open/Shielded n2:3600 rpm; Grease Speed Rating Open/Shielded n1:3000 rpm; Grease Speed Rating n1:3000 rpm; |
| 39 0541 01 Rollix Slewing Ring Bearings | Da:180 mm; Cap bolt recommended tightening torque:515.2 N·m; Pa:15.3 kN; N1:22.225 mm; A1:111.125 mm; Appropriate attachment bolt size G:0.75 in; Cap bolt:2 x 3/4-10 UNC; H:222.25 mm; H2:44.45 mm; ba:48.419 mm; Taconite seal:TER 182; h:44.45 mm; R2:30.163 mm; RG:3/8 NPT; P120°:39.1 kN; J max.:333.375 mm; P150°:35.6 kN; L:387.35 mm; H1:114.3 mm; P180°:42.7 kN; |
| 68967A Franke Slewing Ring Bearings | Pa:17.3 kN; Housing:SAF 618; Mass pillow block:44 kg; Stabilizing ring:SR-21-18; da:79.375 mm; H2:50.8 mm; A2:174.625 mm; P90°:77 kN; ba:52.388 mm; A1:111.125 mm; R1:73.025 mm; S:4.763 mm; Da:190 mm; Initial grease fill:232.47 g; P60°:128 kN; P150°:44.5 kN; Cap bolt recommended tightening torque:515.2 N·m; Cap bolt:2 x 3/4-10 UNC; Max. speed for PosiTrac Plus seal:1800 r/min; End plug (suffix Y):EPR 11; |
| 28 0941 01 Rollix Slewing Ring Bearings | B:192 mm; Basic dynamic load rating C:1830 kN; r3,4 min.:2.1 mm; F:246 mm; Design variant/feature:BC4.1/WO; d:220 mm; Fatigue load limit Pu:360 kN; C:192 mm; Mass bearing:46.1 kg; D:310 mm; s:3 mm; Basic static load rating C0:3650 kN; r1,2 min.:2.1 mm; D1 ≈:279.9 mm; |
| 75034A Franke Slewing Ring Bearings | P150°:32 kN; PG:1/8 NPT; End plug (suffix Y):EPR 10; P120°:35.6 kN; ba:48.419 mm; Labyrinth ring:2 x LOR 182; Cap bolt:2 x 3/4-10 UNC; Da:180 mm; H2:44.45 mm; R2:30.163 mm; h:44.45 mm; L:387.35 mm; Mass pillow block:33.9 kg; P180°:38.3 kN; N1:25.4 mm; Cap bolt recommended tightening torque:515.2 N·m; P60°:94.3 kN; J min.:295.275 mm; RG:3/8 NPT; J max.:333.375 mm; |
| 6 2810 09 Rollix Slewing Ring Bearings | Sealed Speed Rating n3:5600 rpm; Oil Speed Rating Open/Shielded n2:10000 rpm; B:23.00 mm; Basic Dynamic Radial Load Rating C:43600 N; Basic Static Radial Load Rating Co:23600 N; D:90.0000 mm; Grease Speed Rating Open/Shielded n1:8500 rpm; d:30.000 mm; Accessories:One Seal; Fillet Radius ra:1.50 mm; |
| 1 0626 Rollix Slewing Ring Bearings | P150°:25.4 kN; Mass pillow block:12.7 kg; PG:1/8 NPT; Labyrinth ring:2 x LOR 38; Cap bolt recommended tightening torque:81.3 N·m; End plug (suffix Y):EPR 7; ba:32.544 mm; Appropriate attachment bolt size G:0.625 in; J min.:219.075 mm; A1:79.375 mm; Stabilizing ring:SR-15-0; Bearing limiting speed:6300 r/min; H:157.559 mm; P90°:45.4 kN; S:3.175 mm; H1:82.55 mm; P60°:75.6 kN; R1:46.038 mm; |
| 1 213 Rollix Slewing Ring Bearings | Specific dynamic load factor K:80 N/mm²; D:1250 mm; B:635 mm; ra max.:3 mm; b:35 mm; b1:35 mm; dk:1142 mm; Sealing solution:-; rb max.:7.5 mm; Mass plain bearing:2690 kg; Da max.:1183 mm; da max.:949 mm; d:900 mm; da min.:938 mm; r2 min.:7.5 mm; M:13 mm; Design (sliding contact surface combination):Steel/PTFE FRP; Basic static load rating C0:73500 kN; α:2 °; r1 min.:3 mm; |
| 39 0741 01 Rollix Slewing Ring Bearings | D:265.0000 mm; d:100.000 mm; Basic Dynamic Radial Load Rating C:260000 N; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:2500 rpm; Oil Speed Rating n2:3100 rpm; B:60.00 mm; Basic Static Radial Load Rating Co:305000 N; Fillet Radius ra:3.00 mm; |
| 67511A Franke Slewing Ring Bearings | Calculation factor Y1:3.3; Calculation factor e:0.19; Mass bearing + adapter sleeve:1.4 kg; Basic dynamic load rating C:31.2 kN; r1,2 min.:1.5 mm; D:110 mm; B1:47 mm; Calculation factor kr:0.045; Limiting speed:3800 r/min; Basic static load rating C0:12.2 kN; Ba min.:9 mm; Permissible angular misalignment α:1.5 °; Da max.:101 mm; d:55 mm; da max.:73 mm; Calculation factor Y0:3.6; D2 ≈:97 mm; |
| 38 0541 01 Rollix Slewing Ring Bearings | da:63.5 mm; Initial grease fill:68.04 g; RG:1/4 NPT; PG:1/8 NPT; S:3.175 mm; Cap bolt, SAE grade:8; P150°:33.4 kN; Appropriate attachment bolt size G:0.625 in; A2:195.262 mm; Max. speed for Taconite seal:1250 r/min; Ca:37.008 mm; L:285.75 mm; J min.:219.075 mm; N1:19.05 mm; Da:130 mm; H:161.925 mm; J1:47.625 mm; A1:79.375 mm; Housing:SAFS 515; H2:30.163 mm; |
| 66184L Franke Slewing Ring Bearings | B2 ≈:202 mm; G1:24 mm; Basic dynamic load rating C:2969 kN; Limiting speed:1200 r/min; Basic static load rating C0:5100 kN; Fatigue load limit Pu:400 kN; Calculation factor Y2:3.3; Da max.:465 mm; G:Tr 340x5; ra max.:3 mm; r1,2 min.:4 mm; Calculation factor Y1:2.2; B1:184 mm; Calculation factor Y0:2.2; d1:300 mm; da min.:327 mm; Calculation factor e:0.31; b:13.9 mm; K:7.5 mm; B:160 mm; |
| 7 24 Rollix Slewing Ring Bearings | Basic dynamic load rating C:311 kN; Attachment bolt diameter G:19.05 mm; Mass bearing unit:22.5 kg; Limiting speed:2100 r/min; J min.:304.8 mm; H:217.488 mm; A1:133.35 mm; J max.:333.375 mm; s:41.275 mm; A:114.3 mm; L:387.35 mm; B:116.681 mm; d2:152.4 mm; H2:61.913 mm; J1:57.15 mm; S:0.794 mm; H1:107.95 mm; da:100.013 mm; |
| 1 0765 01 Rollix Slewing Ring Bearings | N1:22.225 mm; H2:53.975 mm; ba:57.944 mm; P90°:111 kN; A2:187.325 mm; P60°:185 kN; Mass pillow block:51.3 kg; Cap bolt recommended tightening torque:1220 N·m; P180°:81.4 kN; Da:215.001 mm; Ca:82.804 mm; J1:69.85 mm; da:84.138 mm; Max. speed for PosiTrac Plus seal:1650 r/min; Housing:SAF 620; Appropriate attachment bolt size G:0.75 in; h:51.594 mm; PG:1/4 NPT; End plug (suffix Y):EPR 12; |
| No. | Brand | d | A | N | K | t | l | U | M |
| 6 1116 | Rollix | 45 mm | - | - | - | - | - | - | - |
| 2 082 | Rollix | - | - | - | - | - | - | - | - |
| 6 0307 | Rollix | 105.000 mm | - | - | - | - | - | - | - |
| 77320B | Franke | - | 280 mm | - | - | - | - | - | - |
| 68564A | Franke | - | 45 mm | 21.5 mm | - | - | - | - | - |
| 75034A | Franke | - | - | - | - | - | - | - | - |
| 1 2202 | Rollix | 25 mm | 30 mm | - | - | - | - | - | - |
| 23 0541 01 | Rollix | 25 mm | - | - | - | - | - | - | 23 mm |
| 33 0641 01 | Rollix | 60 mm | - | - | - | - | - | - | - |
| 34 0741 01 | Rollix | 800 mm | 15 mm | - | - | - | - | - | - |
| 2 1295 | Rollix | 571.5 mm | - | - | - | - | - | - | - |
| 77282A | Franke | 100.000 mm | - | - | - | - | - | - | - |
| 39 0741 01 | Rollix | 100.000 mm | - | - | - | - | - | - | - |
| 73100L | Franke | 85.000 mm | - | - | - | - | - | - | - |
| 38 0411 01 | Rollix | - | - | - | - | - | - | - | - |
| 74092A | Franke | 45 mm | - | - | - | - | - | - | - |
| 68959A | Franke | 440 mm | - | - | - | - | - | - | - |
| 24 1091 01 | Rollix | - | 58.737 mm | - | - | - | - | - | - |
| 38 0641 01 | Rollix | - | - | - | - | - | - | - | - |
| 21 0411 01 | Rollix | - | - | - | - | - | - | - | - |
| 1 0289 06 | Rollix | 20.000 mm | - | - | - | - | - | - | - |
| 73111L | Franke | 30 mm | - | - | - | - | - | - | - |
| 2 1715 | Rollix | 170.000 mm | - | - | - | - | - | - | - |
| 31 0541 01 | Rollix | - | - | - | - | - | - | - | - |
| 68733A | Franke | - | 63.5 mm | - | - | - | - | - | - |
| 27 0541 01 | Rollix | 70.000 mm | - | - | - | - | - | - | - |
2 1715 Rollix Slewing Ring Bearings Video
§ 2–1715. Establishment of the District Historical Records ...
§ 2–1715. Establishment of the District Historical Records Advisory Board. [Repealed]. Repealed. (Sept. 5, 1985, D.C. Law 6-19, § 16a; ...
1715-2: Handrail Bracket | Wagner Companies
Item #: 1715-2. Manufacturer : Wagner. | WRITE A REVIEW. Wagner Cast Aluminum Wall Mount Handrail Bracket, Style U, With a Projection of 2-1/2" From Wall To ...
BAY WATCH 2 1715 - Elliott Beach Rentals
BAY WATCH 2 1715. 2701 SOUTH OCEAN BLVD - North Myrtle Beach - Crescent. Share | Reservations: (888) 669-7853 | Unique, Updated, Top of the Line.
1715-A2A 1715 2 Slot Adaptor Base Unit | Allen-Bradley Norway
1715 2 Slot Adaptor Base Unit. Lifecycle status: Active. How to Buy · Learn how to avoid the risks of unauthorized and counterfeit products. Quick Actions.
Bay Watch 2 1715 - Myrtle Beach Vacation Rentals
This nicely decorated one bedroom, one bath condo is located in North Myrtle Beach, SC. It is a Myrtle Beach area condominium with a small kitchen that boasts ...
NORTH MYRTLE BEACH | BAY WATCH 2 1715
This one bedroom, one bath oceanfront condominium in North Myrtle Beach, SC is delightfully furnished so your vacation will be one filled with conveniences.
I/O System, Redundant, Adapter Base, for 2 x 1715-AENTR
I/O System, Redundant, Adapter Base, for 2 x 1715-AENTR, Cat #: 1715-A2A, Mfr: Allen-Bradley.