| 12-20 0841/1-32252 IMO Slewing Ring Bearings | Seals or Shields:Open Type; Clearance:Standard; Cage Type:Brass; D:520mm; Weight:67.10 KGS; Dynamic Load Rating (kN):2130; Limiting Speed Rating (r/min):720; Availability:In Stock; SKU:23976embw33-timken; d:380mm; Reference Speed Rating (r/min):860; Static Load Rating (kN):3940; B:106mm; |
| 68310A Franke Slewing Ring Bearings | B:10mm; Availability:In Stock; Cage Type:Plastic; Weight:0.14 KGS; Fatigue Load Rating (kN):0.68; Preload:Medium; Dynamic Load Rating (kN):13.3; Oil Limiting Speed (r/min):18000; d:75mm; D:95mm; Grease Limiting Speed (r/min):12000; Static Load Rating (kN):16; SKU:71815acdgb/p4-skf; Clearance:Standard; Seals or Shields:Open Type; |
| 68771A Franke Slewing Ring Bearings | A5:46.831 mm; d2:152.4 mm; A:88.9 mm; Limiting speed:2100 r/min; A1:122.237 mm; Mass bearing unit:29.1 kg; N1:23.813 mm; A6:31.75 mm; B:116.681 mm; da:93.662 mm; J:196.85 mm; Attachment bolt diameter G:22.225 mm; Basic dynamic load rating C:311 kN; s:41.275 mm; L:247.65 mm; a:5.556 mm; S:0.794 mm; |
| 12-20 0941/1-32262 IMO Slewing Ring Bearings | B:25 mm; b1:3.9 mm; Da min.:48.5 mm; M:2.5 mm; b:3.9 mm; dk:47 mm; Design (sliding contact surface combination):Steel/steel; Specific dynamic load factor K:100 N/mm²; r2 min.:1 mm; Lubricant:Regular relubricatio; Basic dynamic load rating C:80 kN; ra max.:0.6 mm; r1 min.:0.6 mm; Specific static load factor K0:500 N/mm²; C:20 mm; Mass plain bearing:0.23 kg; d:35 mm; Sealing solution:Double-lip seals; |
| 71045A Franke Slewing Ring Bearings | Basic dynamic load rating C:125 kN; Attachment bolt diameter G:4 x 15.875; a:2.381 mm; A6:19.05 mm; Limiting speed:3700 r/min; N1:17.462 mm; s:28.575 mm; L:4 x 158.75; da:55.563 mm; J:123.825 mm; Mass bearing unit:6.12 kg; A5:30.956 mm; A:60.325 mm; S:0.794 mm; |
| 66168L Franke Slewing Ring Bearings | d:80 mm; G:M 80x2; B1:59 mm; B:18 mm; Hydraulic nut:HMV 16 E; Mass adapter sleeve assembly:0.98 kg; d3:105 mm; d1:69.85 mm; |
| 10-16 0400/0-0803 IMO Slewing Ring Bearings | d:40 mm; Material constant KM:330; dk:53 mm; Basic dynamic load rating C:150 kN; Basic static load rating C0:140 kN; B:28 mm; Specific dynamic load factor K:150 N/mm²; l7 min.:46 mm; d2 max.:94 mm; G:M 42x3; α:6 °; l1 min.:76 mm; r1 min.:0.6 mm; l2 max.:194 mm; C1 max.:24 mm; Mass rod end:1.9 kg; h:145 mm; |
| 10-25 1355/0-0306 IMO Slewing Ring Bearings | Oil Speed Rating n2:12000 rpm; D:52.0000 mm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:23800 N; B:22.20 mm; d:20.000 mm; Accessories:Two Shields; Sealed Speed Rating n3:8500 rpm; Basic Static Radial Load Rating Co:20000 N; Grease Speed Rating n1:8500 rpm; |
| 75033A Franke Slewing Ring Bearings | d:200mm; B:60mm; Reference Speed Rating (r/min):1900; Static Load Rating (kN):1130; Weight:11.00 KGS; Cage Type:Brass; SKU:23940emw33-timken; D:280mm; Availability:In Stock; Dynamic Load Rating (kN):712; Limiting Speed Rating (r/min):1600; Seals or Shields:Open Type; Clearance:Standard; |
| 77218B Franke Slewing Ring Bearings | Initial grease fill:107.73 g; Cap bolt, SAE grade:8; RG:1/8 NPT; L:269.875 mm; Cap bolt:2 x 1/2-13 UNC; Appropriate attachment bolt size G:0.625 in; A1:69.85 mm; P120°:14.2 kN; H2:28.575 mm; Labyrinth ring:2 x LER 21; J max.:228.6 mm; Cap bolt recommended tightening torque:149.1 N·m; h:36.513 mm; J min.:196.85 mm; A2:115.888 mm; H1:76.2 mm; Da:110 mm; P180°:15.6 kN; P90°:23.6 kN; |
| 68482A Franke Slewing Ring Bearings | Weight:0.20 KGS; Clearance:Standard; SKU:xls7.1/2-hoffmann; Seals or Shields:Open Type; Availability:In Stock; d:7.5 Inch; D:10 Inch; B:1.25 Inch; |
| 11-25 1455/1-0317 IMO Slewing Ring Bearings | Basic Dynamic Radial Load Rating C:186000 N; Accessories:No Shield, no Seal; B:65.10 mm; Sealed Speed Rating n3:1800 rpm; D:190.0000 mm; Grease Speed Rating n1:1800 rpm; Fillet Radius ra:2.00 mm; d:105.000 mm; Oil Speed Rating n2:2800 rpm; Basic Static Radial Load Rating Co:180000 N; |
| 11-25 0655/1-0413 IMO Slewing Ring Bearings | D:150mm; d:85mm; Weight:0.02 KGS; Seals or Shields:Open Type; SKU:2217-skf; Reference Speed Rating (r/min):8000; B:36mm; Fatigue Load Rating (kN):1.12; Limiting Speed Rating (r/min):5600; Availability:In Stock; Dynamic Load Rating (kN):58.5; Clearance:Standard; Static Load Rating (kN):23.6; Cage Type:Steel; |
| 68775A Franke Slewing Ring Bearings | Specific dynamic load factor K:10 N/mm²; d:45 mm; Permissible sliding velocity v max.:5 m/s; Specific static load factor K0:20 N/mm²; D1:65 mm; Tolerance housing:H7; Permissible sliding velocity v min.:0.25 m/s; B:30 mm; Tolerance shaft:h8; Coefficient of friction µ min.:0.05; Coefficient of friction µ max.:0.1; D:55 mm; Mass bushing:0.18 kg; B1:6 mm; |
| 75042A Franke Slewing Ring Bearings | Dynamic Load Rating (kN):155; Seals or Shields:Open Type; D:90mm; Limiting Speed Rating (r/min):5600; Availability:In Stock; Static Load Rating (kN):147; Weight:1.00 KGS; Clearance:Standard; B:33mm; Cage Type:Steel; d:40mm; Reference Speed Rating (r/min):6700; SKU:22308kejw33-timken; |
| 10-20 1091/0-32072 IMO Slewing Ring Bearings | Coefficient of friction µ max.:0.15; Permissible sliding velocity v min.:0 m/s; d:90 mm; Specific dynamic load factor K:40 N/mm²; Permissible sliding velocity v max.:1 m/s; B:50 mm; Tolerance housing:H7 m/s; Tolerance shaft:f7 m/s; Mass bushing:0.31 kg; Specific static load factor K0:120 N/mm²; D:95 mm; Coefficient of friction µ min.:0.08; |
| No. | Brand | U | A | b | M | G | l | w | a |
| 66185L | Franke | - | - | - | - | - | - | - | - |
| 91-20 0413/1-37112 | IMO | - | - | - | - | - | - | - | - |
| 92-20 0741/1-37242 | IMO | - | - | - | - | - | - | - | 22.1 mm |
| 68651A | Franke | - | - | - | - | - | - | - | - |
| 68548A | Franke | - | - | - | - | - | - | - | - |
| 68659A | Franke | - | - | - | - | - | - | - | - |
| 12-20 1091/1-32272 | IMO | - | - | - | - | - | - | - | - |
| 74175A | Franke | - | - | - | - | - | - | - | - |
| 92-20 0841/1-37252 | IMO | - | - | - | - | - | - | - | - |
| 77270B | Franke | - | - | - | - | - | - | - | - |
| 68512A | Franke | - | - | - | - | - | - | - | - |
| 92-20 0541/1-37222 | IMO | - | - | - | - | - | - | - | - |
| 75015A | Franke | - | - | - | - | - | - | - | - |
| MTO-210XT | Kaydon | - | - | - | - | - | - | - | - |
| 77244B | Franke | - | - | - | - | - | - | - | - |
| MTO-065T | Kaydon | - | - | - | - | - | - | - | - |
| 68619A | Franke | - | - | - | - | - | - | - | - |
| 11-25 1155/1-0314 | IMO | - | - | - | - | - | - | - | - |
| 68737A | Franke | - | - | - | - | - | - | - | - |
| 73123L | Franke | - | - | - | - | - | - | - | - |
| 73010L | Franke | - | - | - | - | - | - | - | - |
| 77310B | Franke | - | - | - | - | - | - | - | - |
| 11-16 0300/1-0812 | IMO | - | - | - | - | - | - | - | - |
| 68807A | Franke | - | - | - | - | - | - | - | - |
| MTO-122 | Kaydon | - | - | - | - | - | - | - | - |
| MTO-210T | Kaydon | - | - | - | - | - | - | - | 93 mm |
| 68572A | Franke | - | - | - | - | - | - | - | - |
| MTO-145 | Kaydon | - | - | - | - | - | - | - | - |
MTE-210T Kaydon Slewing Ring Bearings Video
MTE-210T - Kaydon Slewing Rings Online Catalog | Lily Bearing
Find details about MTE-210T slewing rings, Choose from our selection of kaydon bearings, including over 800 products in a wide range of styles and sizes
Kaydon Bearing | MTE-210 | MT Series Turntable Bearing
Shop Kaydon Bearing MTE-210 at Applied.com, which includes; MT Series External Gear Turntable Bearing, 14.686" OD, 72 Tooth, 5/7 Diametral Pitch, 14.4"
MT Series - Kaydon Bearings
the geared versions through MTE-705 are also generally available. ... MTE-210. 14.686. 8.268. 1.575. 1.496. 38. 13.190. 16. 0.562. 9.449. 20. 0.562. MTE-210T
Kaydon Bearing | MTE-210T | BEARING | Applied
MTE-210T. BEARING. Item #105495840. each. Shipment Options. One Time Shipment. Auto-Replenish. Frequency. Select an Auto-Replenish Interval
MT External Gear | Socare USA
SCB-MTE-210T, MTE-210T, 14.400, 5/7, 72, 1.496, FS, 5,810. SCB-MTE-210X, MTE-210X, 14.400, 5/7, 72, 1.732, FS, 7,290. SCB-MTE-265, MTE-265, 16.800
STE-210T External Gear Slewing Ring from SilverThin
Silverthin™ STE-210T is an interchangable replacement for these common bearings: Kaydon MTE-210T. Request a Quote: RFQ STE-210T
MT series slewing ring bearings, for cranes, hoists, industrial
The gears are Fellows Stub Involute up to the MTE-324 size and Stub Involute for larger sizes, all manufactured to AGMA Class Q6 ... MTO-210T · load chart