| No. | Brand | b | B | D | G | L | d | d1 | H1 |
| CF 2 1/4 | MCGILL | - | - | - | - | - | - | - | - |
| HR-2-1/2-XBC | SMITH | - | - | - | - | - | - | - | - |
| FCR-1-1/2 | SMITH | - | 21 mm | - | - | - | - | - | - |
| FLRE-3-1/2 | OSBORN LOAD RUNNERS | - | - | 200 | - | - | - | - | - |
| HR-3-1/4 | SMITH | - | - | - | - | - | - | - | - |
| BCR-1-1/2-XB | SMITH | - | - | - | - | - | - | - | - |
| HR-2 | SMITH | - | - | - | - | - | - | - | - |
| HR-1-1/2 | SMITH | - | - | - | - | - | - | - | - |
| FLRE-6 | OSBORN LOAD RUNNERS | - | - | - | - | - | 1.4375 in | - | - |
| FLRE-2-1/2-4 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| PLRUE-2 | OSBORN LOAD RUNNERS | - | - | - | - | - | 10 | - | - |
| MCR-72-S | SMITH | - | - | 1280 mm | - | - | 900 mm | - | - |
| PCR-4-1/2 | SMITH | - | 16.25 | - | - | - | - | - | - |
| HR-1-1/4 | SMITH | - | - | - | - | - | - | - | - |
| HR-1-1/8-XBC | SMITH | - | - | - | - | - | - | - | - |
| MCR-80-S | SMITH | - | - | - | - | - | - | - | - |
| HR-7/8-XBC | SMITH | - | - | - | - | - | 420.000 mm | - | - |
| HR-2-XBC | SMITH | - | - | - | - | - | - | - | - |
| HR-1-7/8 | SMITH | - | - | - | - | - | - | - | - |
| HR-7/8 | SMITH | - | - | - | - | - | - | - | - |
| CR-2-XBEC | SMITH | - | - | - | - | - | - | - | - |
| HR-1-5/8-XBC | SMITH | - | 12 | - | - | - | - | - | - |
| PCR-2-1/4 | SMITH | - | - | - | - | - | - | - | - |
| HPJE-30 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| PCR-3-1/2 | SMITH | - | - | - | - | - | - | - | - |
| HPCE-62-1 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| PCR-2-3/4 | SMITH | - | - | - | - | - | - | - | - |
| H 88 L | RBC BEARINGS | - | - | - | - | - | - | - | - |
| FLRSE-1 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| SMITH PCR-2-1/4 Cam Follower and Track Roller - Stud Type | G2 - Heat Generation Factor (Rib-Roller End):14.5; Ab - Cage-Cone Frontface Clearance:0.06 in; R - Cone Backface To Clear Radius3:0.03 in; B - Cone Width:1.1930 in; Cg - Geometry Factor:0.0903; Design Units:Imperial; C1 - Dynamic Radial Rating (1 million revolutions)6:27500 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:12400 lbf; Cage Type:Stamped Steel; C0 - Static Radial Rating:34300 lbf; |
| RBC BEARINGS H 80 LW Cam Follower and Track Roller - Stud Type | C90 - Dynamic Radial Rating (90 million revolutions)4:14400 N; Cg - Geometry Factor:0.0732; d:40 mm; G2 - Heat Generation Factor (Rib-Roller End):16.1; Cup Part Number:Y32008XMSA; Bearing Weight:0.30 Kg; Y - ISO Factor9:1.58; C0 - Static Radial Rating:71600 N; Cage Type:Stamped Steel; da - Cone Frontface Backing Diameter:45.47 mm; |
| SMITH PCR-2-3/4 Cam Follower and Track Roller - Stud Type | Outside Ring Width B:32.000 mm; Grease Reference Speed:4700 rpm; Weight:2.6 Kg; Features:Shields; Clearance:C3; Cr - Dynamic Load Rating:109 kN; Oil Reference Speed:6700 rpm; Outside Diameter D:170.000 mm; C0r - Static Load Rating:82 kN; Radius Rs min:2.100 mm; |
| SMITH CR-1-7/8-XBEC Cam Follower and Track Roller - Stud Type | Unit Body Material:Cast Iron; Days to Ship:9 Days; Lubrication method:Oil Supply Type; d:20; Surface Treatment:No; Basic Load Rating, Static Rating(N):10900; Cover Type:No; Temperature Properties:Standard; |
| SMITH PCR-1-3/4 Cam Follower and Track Roller - Stud Type | Fit:J7; Rolling Element Material:Bearing Steel; Stroke:No; Surface Treatment:No; Days to Ship:Quote; Bearing Unit, Type:Others; Bearing Inner Dia. Shape:Tapered hole adapter; |
| SMITH HR-1-7/8 Cam Follower and Track Roller - Stud Type | Bearing Weight:0.010 Kg; R - Inner Ring To Clear Radius2:0.3 mm; da - Inner Ring Backing Diameter:14.900 mm; Design Units:METRIC; Da - Outer Ring Backing Diameter:21.600 mm; Limiting Speed (Oil):192000 rpm; Bearing Width:6.000 mm; Cage Type:CR - Phenolic Outer; Ce - Dynamic Radial Rating1:1500 N; r - Outer Ring To Clear Radius3:0.3 mm; |
| SMITH PCR-6 Cam Follower and Track Roller - Stud Type | Unit, Type:Insert Bearing Unit; Fit:J7; Pillow Type, Category:Standard; B:56; d:35; Unit Body Material:Cast Iron; Machining:No; Surface Treatment:No; |
| SMITH HR-1-1/4-XBC Cam Follower and Track Roller - Stud Type | Dimension J:19.5 in; Dimension H:7.126 in; Dimension M:7.0 in; Dimension H1:1.6 in; Note:This product line wa; Series Type:Light Series; Cor - Static Load Rating:149273 lbf; Cr - Dynamic Load Rating:103187 lbf; Maximum Speed:1450 rpm; Dimension H2:16.3 in; |
| OSBORN LOAD RUNNERS PLRUE-2-1/4 Cam Follower and Track Roller - Stud Type | Axial Load Factor Y1:2.51; Center Guidance:Fixed Inner Ring Rib; d:320 mm; Bore Type:Cylindrical Bore; Limiting Speed - Oil:1,000 rpm; Radial Clearance:0.310 to 0.410 mm; Roller Profile:Symmetric; Weight:179.000 kg; Static Load Rating:4,900,000 N; B:150 mm; |
| OSBORN LOAD RUNNERS FLRE-1-3/8 Cam Follower and Track Roller - Stud Type | Ca - Axial Load Rating:11016 lbf; Housing Width:7.0 in; Dimension H2:510 mm; Cr - Dynamic Load Rating:159165 lbf; Series Type:Light Series; Dimension M:260 mm; Dimension L:700 mm; Bearing UPC:013992029201; Cor - Static Load Rating:262577 lbf; Note:This product line wa; |
Smith Bearing HR-1-3/8 | Cam Follower Heavy Stud ...
SMITH BEARING HR-1-3/8 Cam Follower Heavy Stud Unsealed ; Bearing Material, Carbon Steel ; Bearing Type, Needle Roller,Unsealed ; Dynamic Load Capacity, 4060 Lb.Stud Material: Carbon SteelStud Length: 1.25"Bearing Type: Needle Roller,UnsealedRoller Type: Screwdriver Slot Head
HR-1-3/8-B | HR Series Heavy Stud Cam Follower | Applied
Shop Smith Bearing HR-1-3/8-B at Applied.com, which includes; Cam Follower, 1 3/8" OD Straight Roller, 3/4" Heavy Stud, 3/4-16 Thread, Hex Hole End, ...
Smith Bearing HR-1 3/8-XB Cam Follower Needle Roller ...
Smith Bearing HR-1 3/8-XB Cam Follower Needle Roller Bearing, Heavy Stud with Hex-Drive Socket, Sealed, 1.375": Amazon.com: Tools & Home Improvement.Brand Name: Smith BearingHead Style: HexItem Diameter: 1.375 inchesMaterial: HAWA
HR-1-3/8-X - Detail - Manufacturer of Smith Bearing Cam ...
SMITH Bearing® Number, HR-1-3/8-X. (P) Lube Fitting Size, 3/16. (H) Oil Hole Dia. 3/32. (N) Oil Hole Location, 5/16. Recom. Bore .7500.
Smith Bearing HR-1-3/8 Roller Bearing | eBay
Smith Bearing HR-1-3/8 Roller Bearing. Condition is "New". Shipped with USPS Priority Mail. (113)
HR-1-3/8-B - SMITH BEARING | Cam Follower and Track Roller
1-3/8" Roller Diameter; 3/4" Roller Width; Flat Roller Surface Profile; 3/4" Stud Diameter; 3/4-16 Thread Size; Heavy Stud Stud Profile; Open Enclosure; ...
smith bearing hr-1-3/8
Looking for SMITH BEARING HR-1-3/8 BEARING? Price $23.6 + Free Shipping! Easy online ordering with 24/7 expert product support.Roller Width: 0.75 Inch | 19.05 MillimeterThread Size: 3/4-16Other Features: Full Complement | Screwdriver ...Seal Type: Open
Cam Follower, Heavy Stud, Unsealed - Zoro Tools
Smith Bearing #HR-1-3/8 Specifications · Roller Style: Heavy Stud · Roller Shape: Flat · Face Design: Screwdriver Slot · Roller Dia.: 1.375 in · Roller Width: 0.75 ...Bearing Type: Needle Roller, UnsealedStud Length: 1.25 inStud Material: Carbon SteelStud Length (In.): 1.250
SMITH HR-1-3/8 Cam Follower and Track Roller - Stud Type Video