| FAG NJ313-E-M1-C3 Cylindrical Roller Bearings | G:M6x1; C0:40 kN; P:300 mm; Dz:132 mm; d:63.5 mm; L:224 mm; A2:44 mm; T max.:100 °C; N2:70 mm; L3:121 mm; |
| FAG NJ236-E-M1-C4 Cylindrical Roller Bearings | N:M10; L:98 mm; B1:48.3 mm; Designation of bearing:EX206-18G2T20; T min.:-20 °C; A1:25 mm; s1:34.1 mm; A:38 mm; S:18.2 mm; H1:11 mm; |
| FAG NJ2214-E-TVP2-C3 Cylindrical Roller Bearings | Characteristic rolling element frequency, BSF:8.44 Hz; Characteristic cage frequency, FTF:0.44 Hz; Nref:1,300 rpm; e:0.23; Max operating temperature, Tmax:200 °C; Nlim:1,800 rpm; Brand:SNR; Da max:385.4 mm; D:400 mm; Radial clearance class:C3; |
| 4.724 Inch | 120 Millimeter x 7.087 Inch | 180 Millimeter x 1.102 Inch | 28 Millimeter NSK NU1024M Cylindrical Roller Bearings | t:1 mm; F:12 mm; Mass:0.0059 kg; Precision class:P0; ras max:0.3 mm; Lubrication hole on inner ring:Non/No; rs min:0.3 mm; da min:10 mm; B:12.5 mm; Brand:NTN; Size (mm):4.724 Inch | 120 Millimeter x 7.087 Inch | 180 Millimeter x 1.102 Inch | 28 Millimeter ; |
| FAG NJ314-E-M1-C3 Cylindrical Roller Bearings | Outer Race Width:1.772 Inch | 45 Mill; Noun:Bearing; Cage Material:Steel; Snap Ring:No; Long Description:150MM Bore; 270MM Ou; Mass:9.41 kg; Category:Single Row Ball Bear; Rolling Element:Ball Bearing; Other Features:Deep Groove; Fatigue limit load, Cu:5.3 kN; |
| 35 mm x 72 mm x 17 mm FAG NUP207-E-TVP2 Cylindrical Roller Bearings | B:16 mm; Nlim:5,500 rpm; Min operating temperature, Tmin:-20 °C; Characteristic inner ring frequency, BPFI:6.9 Hz; Characteristic outer ring frequency, BPF0:5.1 Hz; f0:15.2; Fatigue limit load, Cu:0.67 kN; D:75 mm; Brand:SNR; Mass:0.23 kg; Size (mm):35 mm x 72 mm x 17 mm ; |
| 20 mm x 47 mm x 14 mm FAG NUP204-E-TVP2 Cylindrical Roller Bearings | J:104 mm; T max.:200 °C; A:66 mm; Weight:3.05 kg; C:43.55 kN; Designation of housing:PA211N-; A1:33 mm; Designation of bearing:US211-35G2T20; Recommended tightening torque for set screw:8 Nm; N:M16; Size (mm):20 mm x 47 mm x 14 mm ; |
| FAG NJ2313-E-TVP2-C3 Cylindrical Roller Bearings | C:9.55 kN; B:19.1 mm; L:57 mm; T min.:-20 °C; C0:4.78 kN; Recommended tightening torque for set screw:5.5 Nm; e:15 mm; H:99 mm; s1:23.05 mm; T max.:200 °C; |
| FAG NJ312-E-TVP2-QP51-C4 Cylindrical Roller Bearings | N:13mm; A:40 mm; H:70 mm; H2:101 mm; G:M6x1; T max.:100 °C; J:95 mm; Recommended tightening torque for set screw:5.5 Nm; L1:48 mm; H1:15 mm; |
| FAG NJ2215-E-TVP2-C3 Cylindrical Roller Bearings | Max operating temperature, Tmax:110 °C; Fatigue limit load, Cu:0.13 kN; Dynamic load, C:6.1 kN; rs min:0.6 mm; Brand:NTN; d:12 mm; Characteristic cage frequency, FTF:0.37 Hz; Radial clearance class:C3; Da max:28 mm; da min:16 mm; |