| FAG NJ316-E-M1-C4 Cylindrical Roller Bearings | m:10 mm; S:19 mm; B:51.6 mm; C0:23.7 kN; C1:6.5 mm; C:24 mm; SW:4.76 mm; D:90 mm; Recommended tightening torque for set screw:18.7 Nm; T min.:-20 °C; |
| FAG NUP207-E-TVP2-C3 Cylindrical Roller Bearings | B:49.2 mm; C0:18.2 kN; L:144 mm; A1:16 mm; L1:88 mm; H:114 mm; Dz:88 mm; H1:102 mm; L3:83 mm; H2:83 mm; |
| FAG NJ2214-E-TVP2-C4 Cylindrical Roller Bearings | Brand:SNR; Characteristic rolling element frequency, BSF:6.35 Hz; Fatigue limit load, Cu:213 kN; Min operating temperature, Tmin:-40 °C; ra max:3 mm; Nlim:2,000 rpm; Characteristic outer ring frequency, BPF0:8.06 Hz; Y0:2.68; Y1:2.74; D:400 mm; |
| FAG NJ313-E-M1-F1-T51F Cylindrical Roller Bearings | B:41.2 mm; SW:3.97 mm; D:85 mm; T max.:200 °C; r:1.1; Weight:0.72 kg; C:19 mm; C0:20.8 kN; C1:6.5 mm; G:5/16-24UNF; |
| FAG NJ2314-E-M1-C3 Cylindrical Roller Bearings | E:22 mm; A1:27 mm; H:47.6 mm; C:25.7 kN; J:68 mm; T min.:-20 °C; Z:22.5 mm; B:42.9 mm; L1:35 mm; C0:15.2 kN; |
| FAG NJ2332-E-M1-C3 Cylindrical Roller Bearings | T max.:100 °C; H1:25 mm; Designation of open end cover:SCOU212-38; C0:32.8 kN; Recommended tightening torque for set screw:16.8 Nm; Designation of bearing:UC212-38G2T04; N:20mm; B:65.1 mm; L:241 mm; L1:70 mm; |
| FAG NJ313-E-M1-C4 Cylindrical Roller Bearings | EAN:4547359004571; Inch - Metric:Metric; Enclosure Type:Non-Contact Seal; rs min:1 mm; d:25 mm; Minimum Buy Quantity:N/A; Noun:Bearing; Category:Single Row Ball Bear; Snap Ring:No; Long Description:25MM Bore; 52MM Outs; |
| FAG NJ2328-E-M1-C3 Cylindrical Roller Bearings | L:130 mm; Weight:3.07 kg; s1:27.8 mm; N:19mm; Designation of bearing:UC211-32G2T20; T min.:-20 °C; d:50.8 mm; J:184 mm; A2:58.4 mm; S:22.2 mm; |
| FAG NJ314-E-TVP2-C4 Cylindrical Roller Bearings | H:102 mm; G:M6x1; s1:27.8 mm; L3:57 mm; H1:89 mm; L:113 mm; T max.:200 °C; S:9 mm; T min.:-20 °C; H2:56 mm; |
| FAG NJ2214-E-M1-C3 Cylindrical Roller Bearings | Brand:NTN; D:130 mm; da max:90.5 mm; Static load, C0:49.5 kN; Max operating temperature, Tmax:110 °C; Characteristic rolling element frequency, BSF:5.76 Hz; Characteristic outer ring frequency, BPF0:4.57 Hz; Nlim (grease):3,200 rpm; Fatigue limit load, Cu:2.21 kN; rs min:1.5 mm; |