| FAG NJ2332-E-M1A-C3 Cylindrical Roller Bearings | End Cap Groove:Yes; Housing Type:2 Bolt Pillow Block; Bearing Insert Material:Steel; Brand:Baldor-Dodge; Retainer Type:Std Retainer; Bearing Inner Ring Material:Steel; Base to Center Height:Standard; Grease Type:Unirex N2; Ball Material:Steel; Flinger Material:Steel; |
| FAG NJ2315-E-M1-C4 Cylindrical Roller Bearings | Max operating temperature, Tmax:120 °C; Fatigue limit load, Cu:81.5 kN; Product Group:B04144; E:207 mm; Da max:227 mm; Minimum Buy Quantity:N/A; Static load, C0:790 kN; Category:Bearings; Mass (without HJ ring):18 kg; Weight / Kilogram:18; |
| FAG NJ232-E-M1-C4 Cylindrical Roller Bearings | d1:32.4 mm; B:21.4 mm; C:14 mm; T max.:100 °C; G:1/4-28UNF; r:0.6; SW:3.18 mm; D:47 mm; C1:4 mm; S:7.5 mm; |
| 35 mm x 72 mm x 17 mm FAG NUP207-E-TVP2 Cylindrical Roller Bearings | B:16 mm; Nlim:5,500 rpm; Min operating temperature, Tmin:-20 °C; Characteristic inner ring frequency, BPFI:6.9 Hz; Characteristic outer ring frequency, BPF0:5.1 Hz; f0:15.2; Fatigue limit load, Cu:0.67 kN; D:75 mm; Brand:SNR; Mass:0.23 kg; Size (mm):35 mm x 72 mm x 17 mm ; |
| FAG NJ2216-E-TVP2-C3 Cylindrical Roller Bearings | Ball Grade:Class 10; UPC:782475891542; End Cap Groove:Yes; Grease Type:Unirex N2; Housing Coating:Powder Coat; Flinger Material:Steel; Ball Bearing Housing Series:206 Series; d:1.0000 in; Base to Center Height:Not Applicable; Retainer Type:Std Retainer; |
| FAG NJ311-E-M1-C3 Cylindrical Roller Bearings | A2:45.5 mm; s1:30.5 mm; A:30.3 mm; T min.:-20 °C; C:12.8 kN; J:90 mm; A1:10 mm; C0:6.65 kN; B:34 mm; N:11,5mm; |
| 55 mm x 100 mm x 21 mm FAG NUP211-E-TVP2 Cylindrical Roller Bearings | A1:16 mm; T min.:-20 °C; L:143 mm; d:49.21 mm; C:35.1 kN; J:111 mm; Weight:2.48 kg; T max.:200 °C; Designation of housing:F210-; A2:54.6 mm; Size (mm):55 mm x 100 mm x 21 mm ; |
| 2.362 Inch | 60 Millimeter x 4.331 Inch | 110 Millimeter x 0.866 Inch | 22 Millimeter NSK NU212ETC3 Cylindrical Roller Bearings | Da min:62 mm; Characteristic cage frequency, FTF:0.42 Hz; da max:44 mm; Y2:1.6; Nref:6,300 rpm; r1s min:1.5 mm; d1:52.3 mm; T:18.25 mm; Static load, C0:62.4 kN; Db min:67 mm; Size (mm):2.362 Inch | 60 Millimeter x 4.331 Inch | 110 Millimeter x 0.866 Inch | 22 Millimeter ; |
| FAG NUP205-E-TVP2-C3 Cylindrical Roller Bearings | Radial clearance class:CN; Static load, C0:1.4 kN; da min:10 mm; Brand:NTN; Da max:20 mm; Max operating temperature, Tmax:120 °C; d:8 mm; D:22 mm; Nlim (oil):37,000 rpm; Nlim (grease):32,000 rpm; |
| FAG NJ2314-E-TVP2-C3 Cylindrical Roller Bearings | Snap Ring:No; Product Group:B00308; Radial clearance class:C4; Outside Diameter:2.441 Inch | 62 Mill; Outer Race Width:0.63 Inch | 16 Milli; Inventory:0.0; Internal Special Features:No; Dynamic load, C:19.5 kN; da min:35 mm; Harmonized Tariff Code:8482.10.50.68; |