CEP BEARING COMPANY

Cylindrical Roller Bearings

Cylindrical roller bearings are available in many designs, series and sizes. The major design differences between the bearings presented in this section are in:the number of roller rows (one, two or four)
the type of cage (with, without or special designs).Bearings with a cage can accommodate heavy radial loads, rapid accelerations and high speeds.Full complement bearings (without a cage) incorporate a maximum number of rollers and are therefore suitable for very heavy radial loads at moderate speeds.
High-capacity cylindrical roller bearings combine the high load carrying capacity of a full complement bearing with the high speed capability of a bearing with cage.
the configuration of the inner and outer ring flanges (position and number of guide flanges)

55 mm x 100 mm x 21 mm FAG NUP211-E-TVP2 Cylindrical Roller Bearings: A1 : 16 mm; T min. : -20 °C

45 mm x 85 mm x 19 mm FAG NUP209-E-TVP2 Cylindrical Roller Bearings: Designation of bearing : US203-11G2T20; T max. : 200 °C

35 mm x 72 mm x 17 mm FAG NUP207-E-TVP2 Cylindrical Roller Bearings: B : 16 mm; Nlim : 5,500 rpm

30 mm x 62 mm x 16 mm FAG NUP206-E-TVP2 Cylindrical Roller Bearings: Recommended tightening torque for set screw : 16.8 Nm; A : 60 mm

25 mm x 52 mm x 15 mm FAG NUP205-E-TVP2 Cylindrical Roller Bearings: L1 : 54 mm; C : 9.55 kN

20 mm x 47 mm x 14 mm FAG NUP204-E-TVP2 Cylindrical Roller Bearings: J : 104 mm; T max. : 200 °C

75 mm x 160 mm x 37 mm FAG NJ315-E-TVP2 Cylindrical Roller Bearings: T max. : 100 °C; L : 144 mm

70 mm x 150 mm x 35 mm FAG NJ314-E-TVP2 Cylindrical Roller Bearings: T min. : -20 °C; Designation of housing : PE211-

65 mm x 140 mm x 33 mm FAG NJ313-E-TVP2 Cylindrical Roller Bearings: Anti-Rotation Pin : Yes; UPC : 782475653393

60 mm x 130 mm x 31 mm FAG NJ312-E-TVP2 Cylindrical Roller Bearings: S : 21.4 mm; G : R1/8"

180 mm x 320 mm x 52 mm FAG NJ236-E-M1 Cylindrical Roller Bearings: Bearing Outer Ring Material : Steel; Max Bearing Speed : 5500 rpm

55 mm x 120 mm x 29 mm FAG NJ311-E-TVP2 Cylindrical Roller Bearings: da max : 111 mm; Characteristic rolling element frequency, BSF : 6.2 Hz